October 25, 2017 - 18.18
#MAPEISustainability: LBC (Living Building Challenge) ‘Red List Free’ -What does it mean to ‘building occupant health'?
por MAPEI Product Support
In the 1980s, MAPEI championed the importance of “sustainable chemistry” with the introduction of the Ultrabond ECO® line
of adhesives, which dramatically reduced or eliminated volatile organic compounds (VOCs)
by moving away from solvent-based to water-based adhesives. As the construction industry began to see the importance of sustainable practices within the industry with the inception of USGBC/LEED
in 1993, Living Building Challenge (LBC)
in 2006 and now with the WELL Building Standard
in 2015 with a greater emphasis on ‘health and well’ being of the occupants.
The Living Building Challenge (LBC) includes seven performance categories, titled as petals. The red list falls under the materials petal. A building project may not contain any of the Red List chemicals or chemical groups (down to 100ppm threshold level)
The current Red List contains 800+ chemicals that are harmful for human health and the environment. The LBC falls under the International Living Future Institute (ILFI) which developed a non-regulatory based list, which is voluntary, identifying hazardous chemicals that should be avoided in building materials used on an LBC construction projects. To achieve this goal, LBC created a program known as DECLARE Labels
for individual products that identify the following:-Where does a product come from?-What is it made of?-Where does it go at the end of its life?
Once of the key factors that the label identifies, is “What is it made of?”
as to whether or not its ingredients are hazardous and found on the LBC ‘red list’ or not? This voluntary list is updated as new science becomes available, identifying new hazardous materials of concern. The ‘red list’ has the chemical name and the corresponding CAS Registry Numbers (provide a unique, unmistakable identifier for chemical substances maintained by the American Chemical Society
) correspond with each ‘red list’ item.
The best way to visualize the intent of the ‘red list’ is to think about when we shop for groceries, what is one of the first things we do when we pick up a packaged product? We turn it over and look at the back to see the ingredients listed, so we can make an informed decision whether or not to purchase this product. Since 1973, these FDA regulations
have included the number of calories, grams of protein, carbohydrate, fat, sodium and so forth to better educate the consumer. LBC is working toward a similar goal with construction products, so building owners, designers and specifiers can make product selection based not only on performance, but also on reduced or no hazardous ingredients.
One of MAPEI’s 7 Pillars for growth is to “Lead in Environmental, Health, and Safety”,
to achieve this goal we understand that we must continually innovate our product formulations. When a product is in the developmental stage, all factors influencing its impact to the environment and human health are evaluated from a sustainable perspective. This includes reducing and replacing ‘chemicals of concern’ and Living Building Challenge (LBC) ‘red listed’ (e.g. formaldehyde, phthalates and isocyanates
) with water-based chemicals that have a lower risk without compromising product performance and workability (LBC ‘red list free’ will be listed on the product data sheet that meet this criteria
). Benefiting both the installer who applies the product and the building occupants during the life-cycle of the installation.
This following series of (8) #MAPEITechTalk Blogs will explore a different aspect of balancing ‘Performance’ with ‘Sustainability'.
This first #MAPEITechTalk Blog looks at the LBC red list:
- Product Data Sheet: a products’ performance criteria (ANSI, ASTM, ISO, ICC-ES, IAPMO, DOT) based on test data and standards -features, benefits, limitations and application requirements
- Product Regulatory Compliance: communicated in the SDS (Safety Data Sheet) related to Federal and State requirements, including labeling and transportation
- EPD (Environmental Product Declaration): a concise environmental product performance report based on Life-Cycle Analysis (LCA) to demonstrate the environmental impacts of a product from extraction of raw materials and processing to distribution, use and end of life.
- Green Squared Certification is based on the ANSI A138.1 consensus Standard (third-party certified) which covers tile product characteristics, manufacturing, end of product life management, progressive corporate governance and innovation to establish sustainability criteria for products throughout their entire lifecycle from substrate to the finished tile surface.
- HPD (Health Product Declaration), Cradle to Cradle (C2C) Manufacturer’s Inventory: All of these programs focus on disclosure of the product’s ingredients -both ‘intentional’ and ‘residual’ in a range from 1000ppm down to 100ppm
- LBC (Living Building Challenge) ‘Red List Free’ (ILFI): Although this program is part of LBC, a specifier will often refer to the ‘red list’ to ensure that certain chemicals are not in the products they are specifying -ie: isocyanates, phthalate plasticizers.
- VOC Content: per SCAQMD (South Coast Air Quality Management District, Rule #1168 for adhesives and sealants or Rule #1113 for architectural coatings): It is a product’s ‘Potential’ to release VOCs into the occupied space given the right environmental conditions.
- VOC emission: per California Department of Health; Section 01350: It is a ‘Real World’ application, using a chamber test that simulates the conditions in an occupied building and quantifies both the VOCs and chemicals emitted into the air.