MAPEFLOOR I 390 EDF

Two-component, self-levelling epoxy formulate for high strength, dissipative coatings.
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 80 : 20 by weight.
Colour of mix: neutral.
Consistency of mix: fluid.
Density of mix (kg/m³): 1,420.
Viscosity of mix (Pa·s): 1.5-2.5 (# 3 - 20 rpm).
Workability time: approx. 40 min. at +10°C; approx 25 min. at +20°C; approx 15 min. at +30°C.
Set to foot traffic: approx. 30 h at +10°C; approx 24 h at +20°C; approx 16 h at +30°C.
Electrical resistance (EN 1081) (Ohm): 104these values may vary according to surrounding conditions (temperature and humidity) and the equipment used to take the readings.
Compressive strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 80 (MAPEFLOOR I 390 EDF without fillers).
Flexural strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 40 (MAPEFLOOR I 390 EDF without fillers).
Abrasion resistance - Taber abrasion meter (CS17 disk - 1,000 revs. - 1,000 g) after 7 days at +23°C (DIN 53109) (mg): 70.
Shore D hardness after 3 days at +23°C (DIN 53505): 77.
Adhesion to concrete (ISO 4624) (N/mm²): ≥ 1.5 (failure of concrete).
Storage: 24 months in its original packaging in a dry place at a temperature of between +5°C and +30°C.
Consumption: max. 2.5 kg/m².
Packaging: 20 kg kit (A + B).

MAPEFLOOR I 390 EDF is part of the lines:

Related documentation

Technical data sheet
Download

Last Projects MAPEFLOOR I 390 EDF

Category icon PRODUCTION FACILITIES

2012/2017

Data Center @ Tagore Lane

Singapore

Resin floors application

Category icon PRODUCTION FACILITIES

Factory of the Changan Ford Automobile

Hangzhou, China

Installation of floor and wall coverings

Keep in touch

Subscribe to our newsletter to get Mapei news