One-component, water-based polyurethane varnish, with extremely low emission levels of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors. Suitable for floors subject to frequent pedestrian use.

Where to use:
Highly protective, wear and abrasion-resistant finish for traditional wooden floors for civil and commercial use, both pre-sanded and those requiring repair.
Ultracoat P915 has excellent resistance to abrasion and skid marks. It is aesthetically different from conventional water-based products, in that it is transparent and leaves a warm-coloured finish to the wood.
We recommend a three-coat cycle using Ultracoat P915 or, as an alternative, a first coat of Ultracoat P920 2K or Ultracoat P920 S-T, two-component, water-based base products followed by one or two coats of Ultracoat P915.
Ultracoat P915 is available in extra opaque (10 gloss- Ultracoat P915/T), opaque (30 gloss- Ultracoat P915/O) and satin finish (60 gloss- Ultracoat P915/S).

Technical data:
Consistency: liquid.
Colour: transparent.
Gloss factor: extra opaque (10 gloss), opaque (30 gloss) and satin finish (60 gloss).
Inflammable: no.
Recommended application temperature range: from 10°C to 35°C.
Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water or Ultracoat EL.
Sanding: after 8 hours.
Painting: after 3 hours, and within 5 hours.
Ready for use: 36-48 hours.
Storage: 12 months.
Application: by roller (Ultracoat Roller Plus or Ultracoat Roller Finish, according to whether it is the first coat or the following coats) or brush.

70-90 g/m2 per coat.

5 l cans.

ULTRACOAT P915 is part of the lines:

Related documentation

Technical data sheet

Last Projects ULTRACOAT P915


Reihenhausanlage Traiskirchen

Traiskirchen, Austria

Installation of floors


MA.CO. R2 Condominium

Rende, Italy

New building

Keep in touch

Subscribe to our newsletter to get Mapei news