Project Budai csaladi haz, Budapest


Yard	Cold cladding, warm cladding, waterproofing
Location	Budapest, Hungary
Subcategory	HOUSE
Application	Cold cladding, warm cladding, waterproofing, treatment of concrete surfaces
Start and finish date	2022/2023
Application Type	Floor/wall coverings, Tile & stone installation systems
Contractor company	NégyeS Mérnökiroda Kft.
Installer companies	Progresszív Burkoló Kft.
Architects	Regőczi Dénes
MAPEI Distributor	Hofstädter Építőanyag Centrum Kft., Zsiráf Építőanyagok Kft., Dalos és Társa Kft.
Credits	Salty Production Kft.
MAPEI Coordination	Hugyecsek György

ANTIPLUVIOL

High-performance, silicone water-repellent in watery solution for external walls. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry…

High-performance, silicone water-repellent in watery solution for external…

Special high-performance, deformable, non-slip grey adhesive with extended open time, very low emission of volatile organic compounds and offset Greenhouse Gas emissions for bonding ceramic tiles and…

Special high-performance, deformable, non-slip grey adhesive with extended open…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems. TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven…

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external…

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRABOND P990 1K

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old…

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…