Project Central Bank of Nigeria, Abuja

Central Bank of Nigeria

Abuja, Nigeria

Ref #: 3064

Category: COMMERCIAL FACILITIES

Construction


Yard	Floor/wall coverings
Location	Abuja, Nigeria
Subcategory	BANK
Built in	2001
Opened in	2002
Application	Internal installation of various type of natural stone and ceramic tiles
Application Type	Floor/wall coverings
Client	State of Nigeria
Contractor company	Julius Berger AG - Migeria
Installer companies	Strohmann International, Hofheim-Wallau
Architects	Interstate Architects
MAPEI Distributor	Mobau Braun, Hofheim-Wallau
Project Manager	Mr. Tiefenbach/Ms. Wolf-Gericke, Bilfinger - Wiesbaden

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has a very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

GRANIRAPID

Two-component high performance fast-setting and hydrating cementitious adhesive for ceramic tiles and stone materials. WHERE TO USE For bonding all kinds of interior and exterior ceramic tiles;…

Two-component high performance fast-setting and hydrating cementitious adhesive…

ISOLASTIC

Latex additive to impart elasticity to cement based adhesive. Isolastic is a synthetic polymer to be mixed with Kerabond T or Adesilex P10 to improve their performances and deformability to meet the…

Latex additive to impart elasticity to cement based adhesive. Isolastic is a…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERALASTIC

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Set to light foot traffic: approx. 12 hours. Ready for use: approx.…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRAPLAN

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: New or existing substrates, preparing them to receive all kinds of flooring where a high…

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm.…