Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Ready for…
Ready-to-use adhesive paste with no vertical slip and long open time for…
Keraflex is the family of cementitious adhesives characterised by high performance and extreme versatility for installing ceramic tiles and stone, including large formats and over large surfaces.…
Keraflex is the family of cementitious adhesives characterised by high…
Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Set to light foot traffic: approx. 12 hours. Ready for use: approx.…
Two-component, high-performance polyurethane adhesive for ceramic tiles and…
KERAPOXY is a two-component acid-resistant high-performance epoxy grout for grouting ceramic tiles and stone material, for joints of at least 1 mm. Can also be used as an adhesive.
KERAPOXY is a two-component acid-resistant high-performance epoxy grout for…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…
One-component primer for silicone sealants. TECHNICAL DATA: Application of…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…