Project The Ville Resort Casino, Townsville

The Ville Resort Casino

Townsville, Australia

Ref #: 5903

Category: TOURISM AND WELLNESS

Construction


Yard	swimming-pools and interior areas
Location	Townsville, Australia
Subcategory	SWIMMING POOL
Built in	2017
Opened in	2018
Application	supply of products for waterproofing and installation of ceramics
Start and finish date	2017/2018
Application Type	Floor/wall coverings
Client	CLG Group
Contractor company	Hutchinson Builders
Installer companies	Jerry and the Tile Makers and Kirratech Pool Services
Architects	Woods Baggot
Specialists involved	STP Consultants
MAPEI Distributor	Jerry and the Tile Makers
Credits	Michael Greves
Project Manager	Directitude Management
MAPEI Coordination	Rod Howard

Product used for the project

ISOLASTIC

Latex additive to impart elasticity to cement based adhesive. Isolastic is a synthetic polymer to be mixed with Kerabond T or Adesilex P10 to improve their performances and deformability to meet the…

Latex additive to impart elasticity to cement based adhesive. Isolastic is a…

High-performance cementitious adhesive with extended open time for ceramic tiles and stone materials. TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ? 30 minutes. Set to foot traffic:…

High-performance cementitious adhesive with extended open time for ceramic…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive, with extended open time and no vertical slip, with very low emission level of volatile organic compounds. Especially suitable for the installation…

High-performance, deformable cementitious adhesive, with extended open time and…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…

Two-component, high-flexibility cementitious mortar (with crack-bridging 2…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

TOPCEM

Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…

Special fast setting hydraulic binder for the preparation of normal setting and…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

KERACOLOR GG

Product not available for this market,
contact us

The Ville Resort Casino

Construction

Product used for the project

Keep in touch