Project Zala Springs Golf Resort, Zalacsány

Zala Springs Golf Resort

Zalacsány, Hungary

Ref #: 1112

Category: TOURISM AND WELLNESS

Construction


Yard	interior rooms and terraces
Location	Zalacsány, Hungary
Subcategory	GOLF CLUB
Built in	2015
Application	waterproofing, thermal insulation and ceramics installation
Start and finish date	2015/2020
Application Type	Installation of floors
MAPEI Coordination	Roland Horváth (Mapei Kft.)

Product used for the project

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERALASTIC T

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Set to light foot traffic: approx. 12 hours.…

Two-component, high-performance polyurethane adhesive with no vertical slip for…

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock® technology, ideal for grouting ceramic tiles and mosaics. For joints of at least 1 mm.…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for…

Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S2

One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…

One-component, high-performance, highly-deformable, lightweight cementitious…

ULTRAPLAN ECO 20

Rapid hydrating, fast-drying self-levelling compound. WHERE TO USE Ultraplan Eco 20 is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing…

Rapid hydrating, fast-drying self-levelling compound. WHERE TO USE Ultraplan…