FOUR-COMPONENT HIGH-STRENGTH POLYURETHANE/ CEMENT-BASED
SELF-LEVELLING MORTAR WITH HIGH RESISTANCE TO CHEMICALS FOR
INDUSTRIAL FLOORS IN LAYERS FROM 2 TO 3 MM THICK
FOUR-COMPONENT POLYURETHANE/CEMENT BASED FORMULATE
FOR COATING WALLS AND FOR FINISHING COATS ON
POLYURETHANE/ CEMENTITIOUS SYSTEMS FOR INDUSTRIAL FLOORS
FOUR-COMPONENT POLYURETHANE/CEMENT BASED FORMULATE
FOR COATING WALLS AND FOR…
FIVE-COMPONENT HIGH-STRENGTH POLYURETHANE/ CEMENT-BASED
SELF-LEVELLING MORTAR WITH HIGH RESISTANCE TO CHEMICALS AND
ELECTROSTATIC DISSIPATIVE PERFORMANCE FOR INDUSTRIAL
FLOORS IN LAYERS FROM 4 TO…
Mapefloor I 312 is a two-component epoxy formulation suitable for self-smoothing coating and/or multi-layer resin floorings with an attractive smooth or non-slip finish.
Mapefloor I 312 is a two-component epoxy formulation suitable for…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…
Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks. TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: – mortar:…
Curing admixture for cementitious mortar and concrete to reduce hydraulic…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin…
Film-forming curing agent in solvent to protect mortar and concrete from drying out too quickly when exposed to sunlight and winds. TECHNICAL DATA: Application: roller or spray. Consumption:…
Film-forming curing agent in solvent to protect mortar and concrete from drying…
Two-part levelling and smoothing componend, consisting of special cements and a syntetic rubbler latex. For interior levelling of differences in thickness from ->10 mm. Suitable for underfloor…
Two-part levelling and smoothing componend, consisting of special cements and a…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC flooring. Where to use: Bonding of conductive flooring in: - all areas where electrostatic charges may cause fire or disturb…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC…
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: powder.…
One-component trowellable coarse-textured cementitious paste applied in layers…
Adhesive in water dispersion with strong, rapid initial hold, with very low emission of volatile organic compounds (VOC) for vinyl floorings. TECHNICAL DATA: Consistency: creamy paste. Colour: beige.…
Adhesive in water dispersion with strong, rapid initial hold, with very low…
One-component, high-performance,highly deformable, lightweight, cementitious adhesive with extended open time, Low Dust technology and extremely high yield. Easy to apply by trowel with excellent…
High performance cementitious grout, polymer modified, for joints from 4 to 15 mm. Applications: Interior and exterior, floor and wall grouting of all types of ceramic tiles (double-fired,…
High performance cementitious grout, polymer modified, for joints from 4 to 15…
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: fine powder.…
One-component trowellable fine-textured cementitious paste applied in layers up…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…
