Mapefloor I 312 is a two-component epoxy formulation suitable for self-smoothing coating and/or multi-layer resin floorings with an attractive smooth or non-slip finish.
Mapefloor I 312 is a two-component epoxy formulation suitable for…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…
Film-forming curing agent in solvent to protect mortar and concrete from drying out too quickly when exposed to sunlight and winds. TECHNICAL DATA: Application: roller or spray. Consumption:…
Film-forming curing agent in solvent to protect mortar and concrete from drying…
Two-part levelling and smoothing componend, consisting of special cements and a syntetic rubbler latex. For interior levelling of differences in thickness from ->10 mm. Suitable for underfloor…
Two-part levelling and smoothing componend, consisting of special cements and a…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC flooring. Where to use: Bonding of conductive flooring in: - all areas where electrostatic charges may cause fire or disturb…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC…
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: powder.…
One-component trowellable coarse-textured cementitious paste applied in layers…
Adhesive in water dispersion with strong, rapid initial hold, with very low emission of volatile organic compounds (VOC) for vinyl floorings. TECHNICAL DATA: Consistency: creamy paste. Colour: beige.…
Adhesive in water dispersion with strong, rapid initial hold, with very low…
ULTRALITE S2 FLEX is the one-component, lightweight, highly deformable cementitious adhesive that is easy to apply even at high temperatures . It is ideal for l aying large-format ceramic tiles on…
ULTRALITE S2 FLEX is the one-component, lightweight, highly deformable…
High performance cementitious grout, polymer modified, for joints from 4 to 15 mm. Applications: Interior and exterior, floor and wall grouting of all types of ceramic tiles (double-fired,…
High performance cementitious grout, polymer modified, for joints from 4 to 15…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm. A vailable in 20 colours. Mixed with the…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…
ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a cementitious-based system for creating decorative floors and walls with a trowel or nuvolato-effect finish , characterised by…
ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.…
High-performance cementitious adhesive with no vertical slip and extended open…
Polyester, aluminium and epoxy resin metal-effect coloured glitter mixed with used for mixing with KERAPOXY DESIGN. TECHNICAL DATA: Maximum dosage: 10% by weight of KERAPOXY DESIGN. Colours: silver…
Polyester, aluminium and epoxy resin metal-effect coloured glitter mixed with…
