Back

ULTRATOP LOFT W

One-component fine-textured cementitious paste for creating decorative floor and wall coatings with a trowel or nuvolato-effect finish.

ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a cementitious-based system for creating decorative floors and walls with a trowel or nuvolato-effect finish, characterised by a pronounced materic look and high resistance to abrasion, all contained within just a thin coat. ULTRATOP LOFT F is a trowel-applied, coarse-textured cementitious paste, unlike ULTRATOP LOFT W which contains finer aggregates and, as a result, has a smoother texture. The two products are normally used together when creating floor and wall coverings, depending on specific project requirements.

The system is recommended for both new floor and wall coverings and for restoring old coverings. It is suitable for use in all domestic and public settings in the interior design sector, including those exposed to intense pedestrian traffic, such as:

Bars, Shops, Apartments, Restaurants, Resort complexes, Luxury retreats, Hotels, Showrooms, Museums, Cafeterias, Wellness areas

To verify the feasibility of the work or the most suitable product request a consultation from our Technical Services Division

Easy to prepare: may be mixed with water only and, if required, coloured by adding specific pre-dispersed pigment Ultratop Easycolor.
Easy to apply with a trowel and dries rapidly.
Versatile: may be used for both new floors and to refurbish existing floors.
May be applied on both horizontal and vertical surfaces.
Suitable for use in both commercial and residential surroundings.
Coated surfaces may be put into service quickly.
Sustainability: it can contribute to LEED credits. EPD (Environmental Product Declaration) compliant.
Compliant with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2020/1170.
Low VOC emission (CDPH standard)