Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…
Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…
High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. Applications: Particularly suitable for the installation of stone…
High performance, deformable, fast setting and hydration two-component…
Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…
Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…
Cementitious adhesive with no vertical slip for ceramic tiles. TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on…
Cementitious adhesive with no vertical slip for ceramic tiles. TECHNICAL DATA:…
High performance cementitious grout, polymer modified, for joints from 4 to 15 mm. Applications: Interior and exterior, floor and wall grouting of all types of ceramic tiles (double-fired,…
High performance cementitious grout, polymer modified, for joints from 4 to 15…
Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Fine-grained, high-performance white cementitious mortar for grouting joints up…
Synthetic latex mixed with sand and cement to make adhesive to bond ceramic tiles and stone material, and smoothing/skimming mortar. WHERE TO USE Keracrete is a latex to be mixed with sand and…
Synthetic latex mixed with sand and cement to make adhesive to bond ceramic…
Keep in touch
