PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide…
PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA:…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…
One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also…
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Mapefloor Finish 57 is a four-component high solids, aliphatic polyurethane floor coating with very good abrasion and chemical resistance performance. Mapefloor Finish 57 is indicated for very high…
Mapefloor Finish 57 is a four-component high solids, aliphatic polyurethane…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer…
Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers. TECHNICAL DATA: Consistency: comp A (liquid), comp B (liquid), comp C (solid). Viscosity of mix…
Three-component hydrophilic gel for consolidating the ground and for injecting…
Keep in touch
