Project Aquacentrum Pardubice, Pardubice


Yard	Aquacentrum Pardubice
Location	Pardubice, Czech Republic
Subcategory	Aquatic Centre
Built in	2011
Opened in	2012
Application	Aquacentrum Pardubice
Application Type	Waterproofing
Client	Město Pardubice
Contractor company	VCES a.s., Metrostav a.s., Chládek & Tintěra a.s.
Installer companies	BUTTERFLY TRADING s.r.o., JVG LIVEX s.r.o.
Architects	CODE s.r.o., Design s.r.o.
Project Manager	Mgr. Kavalír

ADESILEX PG1

Two-component thixotropic epoxy adhesives for structural bonding

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

ISOLASTIC

Improves the performance characteristics of adhesives from the Kerabond range and Adesilex P10 in terms of adhesion, deformability and waterproofing

Improves the performance characteristics of adhesives from the Kerabond range…

good workability excellent durability and resistant to ageing perfect adhesion to all surfaces used in building hardens by chemical reaction without shrinkage (until it becomes highly resistant) high…

good workability excellent durability and resistant to ageing perfect adhesion…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEBAND PE 120

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide…

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA:…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion gun

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…

MAPESIL AC

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and external use on ceramic in damp settings and swimming pools. For strong seals that maintain their look over time.

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

TOPCEM PRONTO is a pre-blended mortar , easy to use with high thermal conductivity, for high-efficiency heated floors . It dries more quickly than normal sand/cement screeds to make your work simpler…

TOPCEM PRONTO is a pre-blended mortar , easy to use with high thermal…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…