Project Centrum Babylon, Liberec


Yard	Swimming-pools covering
Location	Liberec, Czech Republic
Subcategory	MULTIFUNCTIONAL CENTER
Built in	1998
Opened in	2000
Application	New swimming-pools coverings
Application Type	Floor/wall covering
Contractor company	Sdruzeni Havax sro - Liberec
Installer companies	Kodet sro - Kladno
Architects	Union Arch. Liberec; Sportprojecta sro - Brno; Sportakcent sro - Praga

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

ELASTOCOLOR PITTURA

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

GRANIRAPID

High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. Applications: Particularly suitable for the installation of stone…

High performance, deformable, fast setting and hydration two-component…

IDROSILEX

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour. Storage: 12 months. Consumption: – IDROSILEX…

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA:…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERALASTIC

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic:…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. WHERE TO USE ·Waterproofing corners between adjacent walls and between walls and floors before…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: - Additive for cementitious smoothing compounds. Additive for improving the mechanical…

Synthetic rubber latex for improving adhesion and mechanical strength of…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…