Project Private farmhouse, San Concordio di Moriano

Private farmhouse

San Concordio di Moriano, Italy

Ref #: 4875

Category: RESIDENTIAL


Yard	global restoration
Location	San Concordio di Moriano, Italy
Subcategory	HOUSE
Built in	2009
Opened in	2011
Application	global restoration
Application Type	Wall coverings
Client	sigg. Van Blokland Johannes e Rademaker Cornelia
Contractor company	Davide ROmano Costruzioni e Restauri srl
Architects	geom. Antonio TInè
Credits	Sergio Fortuna
Project Manager	geom. Antonio TInè

Product used for the project

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERACOLOR FF

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm. A vailable in 20 colours. Mixed with the…

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

KERAPOXY ADHESIVE

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…