Two-component, flexible polyurethane resin-based adhesive and pore filler/smoothing compound for MAPEFLOOR COMFORT SYSTEM AL/X and MAPEFLOOR COMFORT SYSTEM AR/X.
Available only upon request.
TECHNICAL DATA:
Mixing ratio: component A : component B = 100 : 22.
Viscosity of mix at +23°C (mPa·s): 45,000 (#7 - 20 rpm).
Colour of mix: beige.
Consistency of mix: thixotropic paste.
Density of mix (kg/m³): approx. 1,280.
Workability time at +20°C: approx. 30 mins.
Hardening time at +23°C and 50% R.H.:
– dust dry: 2-4 hours;
– set to foot traffic: 24 h;
– full hardening time: 7 days.
Storage: store in a dry, covered place at a temperature of between +5°C and +30°C. The product may be stored at least 12 months in such conditions.
Application:
– bonding: 3-4 mm notched trowel;
– filling pores and smoothing: straight steel or plastic trowel.
Consumption: around 0.4÷0.8 kg/m² when used as adhesive - actual consumption is heavily influenced by the type of substrate - and 0.4÷0.5 kg/m² per layer when used to smooth over MAPE COMFORT FL.
Packaging: is supplied in 12.2 kg kits (A+B) (component A = 10 kg - component B = 2.2 kg).