ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
TECHNICAL DATA:
Consistency: fine powder.
Colour: white or natural.
Bulk density: 900 kg/m³.
Mixing ratio: approx. 32-35 parts of water per 100 parts by weight of ULTRATOP LOFT W.
Workability time: 20 minutes.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 12 N/mm².
Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg.
Abrasion resistance class (Böhme test) after 28 days: A9.
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.

ULTRATOP LOFT W fait partie des gammes :

Documentation connexe

Fiche technique
Télécharger
Fiche de données de sécurité
Télécharger
Déclaration des performances (DoP)
Télécharger

Derniers projets ULTRATOP LOFT W

Category icon BATIMENTS PUBLICS

2017/2018

Fusco Theatre

Taranto, Italie

Sols industriels a base de ciment ou resines, Renforcement structurel

Category icon BATIMENTS RESIDENTIELS

2019

Private apartment

Rimini, Italie

Sols industriels a base de ciment ou resines

Category icon BATIMENTS RESIDENTIELS

2017/2018

Sem-Abrigo welcome centre

Ponta Delgada, Portugal

Sols industriels a base de ciment ou resines, Finitions murales

Category icon BATIMENTS COMMERCIAUX

2018/2019

MAPEI WORLD PARIS

Paris, France

Finitions murales, Sols, Sols industriels a base de ciment ou resines

Restez en contact

Abonnez-vous à notre newsletter pour connaître les dernières nouvelles de Mapei