Products for Cementitious and Resin Floor Coverings

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

Products for Cementitious and Resin Floor Coverings

Select a product category

Cement-based flooring system

Resin flooring systems

EPOXY SPEED

Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200…

Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…

MAPECRETE STAIN PROTECTION

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water…

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPEFLOOR FINISH 50 N

Two-component, aliphatic, transparent polyurethane finish for absorbent surfaces. TECHNICAL DATA: Mixing ratio: comp A: comp. B = 4.9 : 5.1. Colour…

Two-component, aliphatic, transparent polyurethane finish for absorbent…

MAPEFLOOR FINISH 52 W

Two component, polyurethane finishing sealer to be used as a dust-repellent and anti-oil finishing coat on concrete and Ultratop, or as a finishing…

Two component, polyurethane finishing sealer to be used as a dust-repellent and…

MAPEFLOOR FINISH 53 W/L

Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing…

Two-component, aliphatic, transparent, shiny polyurethane finish in water…

MAPEFLOOR FINISH 54 W/S

Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing…

Two-component, aliphatic, transparent, matt polyurethane finish in water…

MAPEFLOOR FINISH 58 W

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. Where to use: Mapefloor Finish 58 W is a…

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…

MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio:…

Two-component, protective acrylic filming agent in water dispersion for…

MAPEFLOOR KIT MANUTENZIONE

A series of products for cleaning and periodic maintenance of floors to guarantee their performance characteristics and attractive finish. TECHNICAL…

A series of products for cleaning and periodic maintenance of floors to…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

MAPELUX LUCIDA

A high-strength, shiny metallic wax for use with the Mapefloor system, to protect floors subject to intense use. Mapelux Lucida is also used with…

A high-strength, shiny metallic wax for use with the Mapefloor system, to…

MAPELUX OPACA

A high-strength, matt metallic wax used for use with the Mapefloor system, to protect floors subject to particularly intense use. Mapelux Opaca is…

A high-strength, matt metallic wax used for use with the Mapefloor system, to…

MAPENET 150

Alkali-resistant glass fibre mesh for reinforcing waterproof, anti-fracture membranes and insulation coatings. Suitable for reinforcing the…

Alkali-resistant glass fibre mesh for reinforcing waterproof, anti-fracture…

PRIMER GRIP WHITE

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile…

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water…

PRIMER LT

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use. TECHNICAL DATA: Consistency: fluid liquid. Colour:…

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars.…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

RETE 320

Glass fibre mesh for reinforcing epoxy systems. TECHNICAL DATA: Weight: 350 g/m². Mesh size: 15.7 x 10.1 mm. Packaging: 50 x 1 m.

Glass fibre mesh for reinforcing epoxy systems. TECHNICAL DATA: Weight: 350…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…

ULTRATOP INDUSTRIAL

Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40mm. Ultratop Industrial…

Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or…

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled…

One-component trowellable fine-textured cementitious paste applied in layers up…

ULTRATOP STUCCO

Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP. TECHNICAL DATA:…

Grout made from special hydraulic binders for sealing micro-porosity which…

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings