MAPEFLOOR CPU/HD

High-strength polyurethane/cement-based system, for industrial floors; thickness 6 to 9 mm. Complies with standards applied in the foodstuffs sector

MAPEFLOOR CPU/HD

High-strength polyurethane/cement-based system, for industrial floors; thickness 6 to 9 mm. Complies with standards applied in the foodstuffs sector

NON-SLIP FINISH

HIGH RESISTANCE TO THERMAL SHOCK AND CHEMICALS PRODUCTS

MAPEFLOOR CPU/HD is a three-component polyurethane/ cement-based formulate used to create protective coatings on industrial floors subjected to heavy traffic, high chemical aggression, thermal shock, till +120° C etc. (thickness 9 mm).

Areas of use:

Pharmaceutical, chemical and foodstuffs industries; Dairy, wineries, breweries and beverage industries in general; Sugar processing and mineral water bottling plants.

MAPEFLOOR CPU/HD

Three-component, high-strength polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 6 to 9 mm.
Complies with standards applied in the foodstuffs sector.

ADVANTAGES:

Highly rough, non-slip finish
Very good resistance to thermal shock and high resistance to chemicals such as acids, basic solutions, grease, saline solutions, hydrocarbons, etc.
Suitable for floors subject to heavy traffic for its high mechanical resistance and its resistance to abrasion

TECHNICAL DATA:
Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU.
Colour of mix: grey, beige, ochre, red and green.
Consistency of mix: thick.
Pot life of mix at +20°C: 15 minutes.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 8 hours.
Final hardening time: 4 days.
Slip resistance (pendulum test method EN 13036-4):
– dry: 85 (class II);
– wet: 60 (class I).
Storage: 12 months in its original sealed packaging.
Application: American smooth trowel.
Consumption: 2 kg/m² per mm of thickness.
Packaging: 25.8 kg kits (A+B+C).