MAPEFLOOR CPU/RT

Easy-to-applypolyurethane/cement-based mortar system for industrial floors; thickness 6 to 9 mm. Complies with standards applied in the foodstuffs sector

MAPEFLOOR CPU/RT

Easy-to-applypolyurethane/cement-based mortar system for industrial floors; thickness 6 to 9 mm. Complies with standards applied in the foodstuffs sector

HIGH RESISTENCE TO WEAR, ABRASION AND MECHANICAL STRESSES

NON-SLIP FINISH

EASY TO APPLY

MAPEFLOOR CPU/RT is a three-component polyurethane/ cement-based formulate used to create protective coatings on industrial floors subjected to heavy traffic, high chemical aggression, thermal shock, etc. till +120° C (thickness 9 mm).

Areas of use:

Pharmaceutical, chemical and foodstuffs industries; Dairy, wineries, breweries and beverage industries in general; Sugar processing and mineral water bottling plants

MAPEFLOOR CPU/RT

Three-component, high-strength, easy-to-apply, polyurethane-cement mortar with high resistance to chemicals for coating industrial floors in layers from 6 to 9 mm thick.
Complies with standards applied in the foodstuffs sector.

ADVANTAGES:

Highly rough, non-slip finish
Easy to apply
Very good resistance to thermal shock and high resistance to chemicals such as acids, basic solutions, grease, saline solutions, hydrocarbons, etc.
Suitable for floors subject to heavy traffic for its high mechanical resistance and its resistance to abrasion

TECHNICAL DATA:
Mixing ratio: A/B/C : 2.6/2.7/18 plus 5 kg of MAPECOLOR CPU.
Colour of mix: grey, beige, red, green, ochre yellow.
Consistency of mix: thick.
Pot life of mix at +20°C: 15 min.
Dust dry at +23°C and 50% R.H.: 2 h - 4 h.
Set to light foot traffic at +23°C and 50% R.H.: 8 h.
Complete hardening time: 4 days.
Flexural strength after 28 days (EN 13892-2): 13.80 N/mm².
Compressive strength after 28 days (EN 13892-2): 61.70 N/mm².
Storage: 12 months in a dry area in its original, closed packaging.
Consumption: 1.9 kg/m² per mm of thickness.
Packaging: 23.3 kg kits (A+B+C).