Project Fakultní nemocnince Olomouc, Olomouc


Yard	University Hospital Olomouc
Location	Olomouc, Czech Republic
Subcategory	HOSPITAL
Built in	2017
Opened in	2018
Application	University Hospital Olomouc
Start and finish date	2017/2018
Application Type	New building
Client	FN Olomouc
Installer companies	OHL ŽS
Architects	Adam Rujbr
MAPEI Coordination	Jan Bébar

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

KERABOND T

Cement based adhesive for fixing all types of ceramic tiles and mosaics to internal and external walls and floors. Mix with ISOLASTIC for improved performance and increased flexibility. COVERAGE:…

Cement based adhesive for fixing all types of ceramic tiles and mosaics to…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFLEX AC4

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4 is used to seal internal and external expansion and construction joints subject to a medium amount of movement and…

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams. Mapegrout T40 is also…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

ULTRALITE S2 QUICK

TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 30 minutes. Grouting of joints: – on walls: after 2-3 hours. – on floors: after 2-3 hours. Set to light foot traffic: 2-3 hours. Ready for…

TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 30 minutes. Grouting…