Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin…
Coloured paint with a smooth finish made from acrylic resin in water dispersion, for indoor and outdoor tennis courts in porous cement, asphalt or concrete, multi-purpose playing fields, pedestrian…
Coloured paint with a smooth finish made from acrylic resin in water…
Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of paint. TECHNICAL DATA: Consistency: colourless…
Reversible consolidating product in solvent for the conservative restoration…
Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in various grain sizes to make de-humidifying render and masonry mortar. TECHNICAL DATA: Mixing ratio: – 0.5-2.5 mm sand:…
Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU S is supplied in…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks…
Highly protective transpirant, water-repellent, mildew and mould-resistant siloxane coating product for internal and external surfaces. Available in the following granulometries: 0.7 mm and 1.2 mm.…
Highly protective transpirant, water-repellent, mildew and mould-resistant…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…
High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…
High-strength, cementitious sulphate binder for making fluid slurry and/or…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg vacuum-packed polyethylene bags.
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
Transpirant, water-repellent, scratch-effect, trowelable siloxane coating product with good defect covering properties for internal and external surfaces. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering properties for internal and external surfaces, according to DIN 18363 Standards. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering…
Highly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces in compliance with DIN 18363. Available in the following granulometries: 0.7…
Highly transpirant, thick-layered silicate coating product with high filling…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 23-25 parts of water. Pot life of mix:…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA:…
Water-repellent acrylic-siloxane paint with high resistance to UV rays for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the…
Water-repellent acrylic-siloxane paint with high resistance to UV rays for…
Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…
Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
