Cement-based finishing coat for concrete walls and ceilings and cement-sand rendered surfaces. Planitop S12 is a cement-based water-resistant mortar specially formulated as a finishing coat for both…
Cement-based finishing coat for concrete walls and ceilings and cement-sand…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50 is a water dispersion of a special synthetic elastomer, totally resistant to alkaline saponification. When mixed with…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
Ready to use polyrethane one-component, solvent-free, elastic, adhesive with very low emission of volatile organic compounds, for all types of wood and laminated flooring.
Ready to use polyrethane one-component, solvent-free, elastic, adhesive with…
Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…
Two-component cement mortar for concrete finishing Where to use For superficial…
Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Final hardening…
Fluid epoxy impregnator in water dispersion for consolidating and priming…
Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds. Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long for insertion as reinforcing in the first layer…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a white water emulsion of special resins which forms an effecient curing film on concrete. Mapecure SP provides reliable…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is recommended for preparing very fluid (UNI 9858 and ENV 206 consistency classes S4 or S5) high-performance concrete that…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is formulated for the preparation of high performance concrete with high fluidity (consistency class S4 and S5 according to…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Storage: 12 months. Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour:…
Vinyl-acetate additive in water dispersion for cement based smoothing compounds. Where to use: Additive used for the preparation of cement based smoothing compounds to provide improved mechanical and…
Vinyl-acetate additive in water dispersion for cement based smoothing…
Bonding promoter in solvent for two-component epoxy, epoxy-polyurethane and polyurethane adhesives and thinner for PRIMER MF. TECHNICAL DATA: Consistency: liquid. Colour: pinky transparent. Dilution…
Bonding promoter in solvent for two-component epoxy, epoxy-polyurethane and…
