Project BOWIT MOTOR VEHICLE CENTRE, Kozmin Wielkopolski


Yard	REGIONAL MOTOR VEHICLE DIAGNOSTIC STATION WITH CAR & MOTORCYCLE SHOWROOM
Location	Kozmin Wielkopolski, Poland
Subcategory	CAR DISTRIBUTOR, VARIOUS
Built in	2016
Opened in	2018
Application	MAPETEX SYSTEM consisting of ULTRALITE S2 and MAPETEX VLIES, thermal insulation and tile installation.
Start and finish date	2017/2018
Application Type	Cementitious & resin flooring systems, Floor/wall coverings
Client	Mateusz Bolt
Contractor company	PRZEDSIĘBIORSTWO REMONTOWO-BUDOWLANE “KUBIAK” Krotoszyn
Installer companies	PRZEDSIĘBIORSTWO REMONTOWO-BUDOWLANE “KUBIAK” Krotoszyn
Architects	Roman Nur
MAPEI Distributor	PRZEDSIĘBIORSTWO REMONTOWO-BUDOWLANE “KUBIAK” Krotoszyn
Credits	Michał Bartnik
MAPEI Coordination	Michał Bartnik, Robert Reszelski, Krzysztof Szary, Piotr Frątczak

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANISEAL 88 (Former Idrosilex Pronto)

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S2

One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…

One-component, high-performance, highly-deformable, lightweight cementitious…