Project Chopok Hotel, Chopok


Yard	Hydroizolácia, Inštalácia obkladov, dlažieb a prírodného kameňa
Location	Chopok, Slovakia
Subcategory	HOTEL/INN
Built in	2009
Opened in	2009
Application	Hydroizolácia, Inštalácia obkladov, dlažieb a prírodného kameňa
Application Type	Floor/wall coverings
Client	Hotel Chopok
Installer companies	T-Design, s.r.o.
MAPEI Distributor	MAPEI SK, s.r.o.

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). Conformity of Adesilex P10…

High-performance, white cementitious adhesive with no vertical slip and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

Keraflex is the family of cementitious adhesives characterised by high performance and extreme versatility for installing ceramic tiles and stone, including large formats and over large surfaces.…

Keraflex is the family of cementitious adhesives characterised by high…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: - for adhesive slurry: 100-150 g/m²; -…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…