Project Mapletree Business City 2,


Yard	Business Park
Location	Singapore
Subcategory	SHOPPING CENTER
Built in	2014
Opened in	2016
Application	installation of ceramics and stone materials inside and outside
Start and finish date	2015/2016
Application Type	Floor/wall coverings
Client	Shimizu Corporation
Contractor company	Shimizu Corporation
Installer companies	CSC Holdings Limited, Yangzijian International (S) Pte Ltd
Architects	DCA Architect
MAPEI Distributor	Mapei Far East Pte Ltd
MAPEI Coordination	Ryan Liaw (Mapei Far East, Singapore)
Other	Soon after the completion of MBC phase 1, major issues on the tile bonding surfaced. Installation materials were supplied by Laticrete. Tiles from the toilets debonded causing potential danger. At the request of the owner, Mapei did a thorough site inspect

ADESILEX PG2 SP

Two-component thixotropic epoxy adhesive for structural bonding. Applications: - Structural reinforcement of beams and pillars by bonding steel or composite material plates to concrete. -…

Two-component thixotropic epoxy adhesive for structural bonding. Applications:…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERACOLOR SF

Super fine, high performance cementitious grout for joints up to 4 mm. Applications: Easy to apply and finish, smooth and compact, particularly fine, interior and exterior, floor and wall grouting of…

Super fine, high performance cementitious grout for joints up to 4 mm.…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAQUICK S1

High-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the presence of humidity (thickness of adhesive up to 10 mm).…

High-performance, quick-setting, deformable cementitious adhesive with no…

MAPEFLEX PU50 SL

Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…

Paintable, castable polyurethane sealant with a low modulus of elasticity for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NOVOPLAN 21

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…

PLANICRETE 50

Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50 is a water dispersion of a special synthetic elastomer, totally resistant to alkaline saponification. When mixed with…

Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER PU60

Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…

Moisture curing polyurethane resin for consolidating and waterproofing damp…