High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.
High-performance cementitious adhesive with no vertical slip and extended open…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). Conformity of Kerabond T is declared in ITT certificates n° 25050176-1/Gi (TUM) and n° 25080238/Gi…
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…
Super fine, high performance cementitious grout for joints up to 4 mm. Applications: Easy to apply and finish, smooth and compact, particularly fine, interior and exterior, floor and wall grouting of…
Super fine, high performance cementitious grout for joints up to 4 mm.…
Special high performance, deformable, non-slip grey and white adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with offset Greenhouse Gas…
Special high performance, deformable, non-slip grey and white adhesive with…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…
Pre-blended, ready-to-use industrial hardener for concrete floors made from…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…
Water-based, solvent-free consolidator with high penetration properties for…
Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…
Two-component, solvent-free, pure polyurea membrane applied by spray with a…