Project Municipal swimming pool, Viareggio

Municipal swimming pool

Viareggio, Italy

Ref #: 3050

Category: SPORT FACILITIES


Yard	Covering remaking
Location	Viareggio, Italy
Subcategory	SWIMMING POOL
Built in	2002
Opened in	2002
Application	Klinker tiles installation and waterproofing
Application Type	Wall coverings
Client	Tofanelli Spa
Installer companies	Eureka Srl
Architects	Raffaelli
MAPEI Distributor	Dini e Denna
Credits	Strudio Rossi
Project Manager	Daniele Pellegrinetti

Product used for the project

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

GRANIRAPID

Two-component, high-performance, deformable, rapid-setting and hydrating cementitious adhesive for removable rubber tiles. Conformity of Granirapid is declared in ITT certificates n° 85330201.101…

Two-component, high-performance, deformable, rapid-setting and hydrating…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: - for adhesive slurry: 100-150 g/m²; -…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

STABILCEM

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…