Project Pont Ventoux Hydroelectric Center, Susa

Pont Ventoux Hydroelectric Center

Susa, Italy

Ref #: 3871

Category: PRODUCTION AND SERVICES

Construction


Yard	Tunnels realization
Location	Susa, Italy
Subcategory	HYDROELECTRIC STATION
Built in	1997
Opened in	2006
Application	Hydroelectric Center realization
Application Type	Admixtures for concrete
Contractor company	Astaldi/Calcestruzzi SpA

Product used for the project

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

MAPEFLUID X414

Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is recommended for preparing very fluid (UNI 9858 and ENV 206 consistency classes S4 or S5) high-performance concrete that…

Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is…

Two-component cementitious mortar with a low modulus of elasticity for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT BM comp. A with…

Two-component cementitious mortar with a low modulus of elasticity for…

Mapegrout Rapid

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET…

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…

PLANITOP T1

Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…

Two-component cement mortar for concrete finishing Where to use For superficial…