Project Shopping mall Retroville, Kyiv

Shopping mall Retroville

Kyiv, Ukraine

Ref #: 4

Category: PUBLIC BUILDINGS AND PLACES


Yard	Screed repair, surface preparation, indoor installation of ceramic tiles 300х600 and 1600х200 mm
Location	Kyiv, Ukraine
Subcategory	SHOPPING CENTER
Built in	2020
Opened in	2020
Application	Screed repair, surface preparation, indoor installation of ceramic tiles 300х600 and 1600х200 mm
Start and finish date	2019/2020
Application Type	Floor/wall coverings, New building, Surface preparation
Architects	Design Hub International
MAPEI Distributor	Мега-Лайн

Product used for the project

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERAFLEX EXTRA S1 ZERO

High-performance, deformable grey and white cementitious adhesive with variable rheology, with no vertical slip or with high wetting capacity, extended open time, with very low emission of volatile…

High-performance, deformable grey and white cementitious adhesive with variable…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: - for adhesive slurry: 100-150 g/m²; -…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PROSFAS

Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…

Water-based, solvent-free consolidator with high penetration properties for…