Project Sint Janspoort,

Sint Janspoort

Belgium

Ref #: 201002

Category: COMMERCIAL FACILITIES


Yard	Sint Janspoort
Location	Belgium
Subcategory	SHOPPING CENTER
Built in	2005
Opened in	2010
Application	Floor covering
Application Type	Installation of floors
Installer companies	Van Hulle, Carroconstruct, Jerry
Architects	Robbrecht en Daem
MAPEI Distributor	Hermans, Kris De Pauw

Product used for the project

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. Conformity of Keralastic is declared in ITT certificate n° 25120147/AG issued by the Technische Universität…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: - for adhesive slurry: 100-150 g/m²; -…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…

One-component, high-performance, deformable, lightweight cementitious adhesive…