Project Vara Badhus, Vara


Yard	Bathrooms and swimming pools
Location	Vara, Sweden
Subcategory	SWIMMING POOL
Built in	2013
Opened in	2015
Application	Supply of products for water proofing, tile adhesives and grouts, concrete strengthening products.
Application Type	Floor/wall coverings, New building, Products for structural strengthening, Sealants application, Waterproofing systems
Client	Vara Kommun
Contractor company	Peab AB
Architects	ABAKO Arkitektkontor AB, Göteborg
MAPEI Distributor	Centro Byggkeramik
Credits	Marie Sjödin, MA Media
Project Manager	Håkan Svensson, Vara kommun
Other	The municipality of Vara has built a swimming pool / water park combined with a sport facility. The swimming pool is located at Vara Evenemangsgata, and is a neighbor to the Vara Opera house.

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERAFLEX

Keraflex is the family of cementitious adhesives characterised by high performance and extreme versatility for installing ceramic tiles and stone, including large formats and over large surfaces.…

Keraflex is the family of cementitious adhesives characterised by high…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…

One-component, high-performance, deformable, lightweight cementitious adhesive…