PLANITOP RASA & RIPARA

For the best looking facades, the best repair mortar.

PERFECT ADHESION

2 IN 1

NO CRACKING OR CRAZING

QUICK AND SIMPLE

PLANITOP SMOOTH & REPAIR and Planitop Smooth & Repair R4 are fibre-reinforced, rapid-set, thixotropic cementitious mortars for repairing and skimming concrete; applied in layers 3 to 40 mm thick with a trowel or mortar pump.

These products are particularly recommended for structural and non-structural repairs to internal and external horizontal and vertical concrete surfaces and are suitable for structures exposed to the air or in permanent contact with water.

PLANITOP SMOOTH & REPAIR and Planitop Smooth & Repair R4 are certified according to EN 1504-2 (concrete protection) and EN 1504-3 (concrete repairs) and are characterised by their very low emission of volatile organic compounds (VOC) - EMICODE EC1 RPlus.

PLANITOP SMOOTH & REPAIR and Planitop Smooth & Repair R4 remain workable for around 15 minutes and, if workability needs to be extended due to particular site needs or in hot weather, they may be admixed with Mapetard ES, a special liquid set-retardant in water solution. Mapetard ES is an admixture specific for extending workability and setting times by about an extra 15-20 minutes.

 

Typical application examples:

Quick repairs to areas of deteriorated concrete, the edges of beamspillarsbuffer walls and cornices and the front edges of balconies 
Repairing and smoothing
 over concrete mouldings on civil constructions such as skirt roofs and protruding decorative features
Quick smoothing/filling of surface defects in cast concrete such as gravel clustersspacer holessecond pours, etc. before painting the surface
Repairs to prefabricated concrete structures.

PLANITOP RASA & RIPARA

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.

ADVANTAGES:

  • 2 in 1
  • No cracking or crazing
  • Quick and simple
  • Perfect adhesion
  • Resistant to freeze-thaw cycles
  • Waterproof
  • Maximum guarantee
  • Easy to apply
  • Low emission of VOC

TECHNICAL DATA:

Planitop Smooth & Repair is used for non-structural repairs and for smoothing concrete surfaces such as beams, pillars and buffer panels, for covering defects such as gravel clusters and construction joints and for repairing mouldings on civil constructions such as string-courses and overhanging or decorative elements.
Planitop Smooth & Repair is also suitable for repairing structures in permanent contact with water.
When mixed with 4.75-5.25 litres of water, Planitop Smooth & Repair forms a mortar with a thixotropic consistency which is easy to apply even on vertical surfaces without using fixed formwork. Apply the product with a trowel or spatula on solid substrates with no loose parts and with a rough surface and which have been saturated beforehand with water. With Planitop Smooth & Repair smoothing layers and repairs from 3 to 40 mm thick may be applied in a single layer.
Planitop Smooth & Repair complies with the minimum requirements of EN 1504-3 for non-structural R2-class mortars and the requirements of EN 1504-2 coating (C) according to principles MC and IR for protecting concrete.

Consumption
approximately 14 kg/m2 per cm of thickness.

Packaging
25 kg sacks.

 

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download
CE Declaration of Performance
Download
EPD
Download
GEV
Download
P.A.S.S.
Download

Last Projects PLANITOP RASA & RIPARA

Products from the Planitop Smooth & Repair range

PLANITOP RASA & RIPARA is part of the lines:

Keep in touch

Subscribe to our newsletter to get Mapei news