Project Minion Park (Universal Studios Singapore),


Yard	Interior / Exterior
Location	Singapore
Subcategory	LEISURE CENTRE
Application	Supply and Installation of Adhesives and Grouts Products for Waterproofing Supply and Installation of Adhesives and Grouts Products for Waterproofing
Start and finish date	2023/2024
Application Type	Tile & stone installation systems, Waterproofing
Contractor company	MCC Engineering / China Jingye Engineering & Const Pte Ltd
Installer companies	ADF Waterproof Ptd Ltd
Project Manager	Evelyn Tay, Ron Chai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPECRETE LI HARDENER

Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…

Surface treatment in liquid form made from lithium silicate with a…

MAPETOP N AR6

Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…

Pre-blended, ready-to-use industrial hardener for concrete floors made from…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PROSFAS

Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…

Water-based, solvent-free consolidator with high penetration properties for…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…