Project Puskas Arena, Budapest


Yard	New building
Location	Budapest, Hungary
Subcategory	STADIUM
Application	Industrial floor, waterproofing, concrete repair, ceramic installation
Start and finish date	2017/2019
Application Type	New building
Contractor company	Magyar Építő Zrt., ZÁÉV Zrt., Épkar Zrt., WHB Ltd.
Installer companies	Spectech Ltd., Akvaszig Ltd., Tipox Betontechnika Ltd., Stukkó Ltd., Ratskó Bau Ltd., Dominó Ltd.
Architects	György Skardeli
MAPEI Distributor	BNF Áruház, Csorna
MAPEI Coordination	Gergely Garay, István Jankovits, Ervin Horváth, Zsolt Marton, Zsolt Dunai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 400 M

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs. TECHNICAL…

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in…