One-component normal setting cementitious mortar for smoothing concrete and cementitious renders. Monofinish is recommended for smoothing surface imperfections of concrete pours and smoothing the surface of concrete repaired with mortars from the Mapegrout product line. Monofinish mixed with clean water forms a plastic, easily trowellable mortar to be applied on substrates that are solid, compact, and free of oils, form release agents or other deleterious substances. Any old paint must be completely removed. Before applying Monofinish the surface must be completely saturated with water. Pour a 22 kg bag of Monofinish into 4-4.2 litres of clean water. Monofinish can be used for thicknesses up to 2 to 3 mm per coat. Monofinish can be finished with a damp sponge float and then painted with Elastocolor Paint or other paints for outdoor use. Monofinish meets the minimum requirements of EN 1504-3 standards for R2-class non structural mortars and the requirements of EN 1504-2 standards, coating (C), in compliance with MC and IR principles, for concrete protection.