Two-component, high-ductility mortar with a pozzolanic reaction used for reinforcing masonry structures in conjunction with Mapegrid G 120 or Mapegrid G 220 at a thickness of 6 mm and for smoothing and levelling surfaces in concrete, stone and tuff.
Planitop HDM is used in conjunction with Mapegrid G 120 or Mapegrid G 220 (a special mesh made from primed fibreglass) to reinforce masonry structures and to even out surfaces in concrete, stone, brick and tuff. Thanks to its high content of synthetic resin, Planitop HDM has high bonding strength and, once hardened, forms a tough, compact, layer which is impermeable to water and harmful gases present in the atmosphere and is resistant to freeze-thaw cycles.
Planitop HDM is supplied in the form of two pre-dosed components, which must be mixed together without adding either water or any other ingredient. The mortar obtained is applied in a single coat at a thickness of up to 6 mm using a trowel, on surfaces which must be clean, solid and saturated beforehand with water or in case of very absorbent surfaces, primed with Primer G.
The surface is then smoothed over using a flat trowel or sponge float a few minutes after being applied.
Planitop HDM meets the minimum requirements of EN 1504-3 for R2-class non structural mortars and the requirements of EN 1504-2, coating (C), in compliance with MC and IR principles.
1.8 kg/m2 per mm of thickness.
24 kg bags 6.5 kg drums.