Back

PRIMER EP

Two-component waterproofing and consolidating primer, in solvent solution, for screeds and industrial flooring.

Where to use:
- Primer for the consolidation of surfaces of dusty or crumbly cementitious screeds, for anhydrite screeds, radiant heated screeds, old terrazzo tiles, gypsum and gypsum board.
- Waterproofing damp screeds to isolate residual moisture.
- Anti-dust impregnating primer over industrial flooring, garages, raised flooring.
If a levelling compound is used after the application of Primer EP, spread dry sand over the just treated surface to create a suitable mechanical key.
The substrate must be dry and clean, free of oil, grease, traces of paint and any loose particles.

Technical data:
Minimum drying time: 24 hours depending on the porosity of the substrate.
Consistency: liquid.
Colour: transparent.
Flammability: yes.
Application temperature range: from 10°C to 40°C.
Pot life of the mixture: 4-5 hours.
Mixing ratio: Part A : Part B = 1 : 1.
Storage: 24 months.
Application: by roller, brush or watering can.

Consumption
0.5-0.7 kg/m2.

Packaging
5 5 kg drums.