1. Concrete Admixtures -
Accelerators: Dynamon Series
Retarders: Mapetards
Mapecure SRA
3. Waterproofing - Integral -
Crystaline:
Idocrete KR1000
4. Waterproofing - Integral -
Pore Blocker: Idocrete WP
5. Waterproofing - Wet Area -
Cement-based
Mapelastic ZERO
Cement-based: Planiseal 388
7. Flooring:
Floor Hardener Liquid:
Mapecrete Li-HARDENER
Self-levelling Mortar: Ultratop
Epoxy SL: Mapefloor | 302 SL
Epoxy Coating: Mapecoat | 62W /
Mapecoat | 64W AP
Epoxy AS: Mapefloor | 360 AS
Lithium-based liquid hardener, floor densifier, to create a durable and abrasion resistant floor. To be applied by spray or pour it to the surface and wait until it penerates.
Ultra-fast setting, self-levelling mortar based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm.
2-comp self levelling Epoxy flooring. Suitable for self-levelling and/or multi-layer resin flooring with smooth or anti-slip finish with good abrasion and chemical resistance performance. Thickness 1 - 2 mm.
Two-component, water dispersed epoxy coating with a gloss finish.
2-comp Self-Levelling Epoxy Anti-static dissipative flooring. Electrical Resistivity 106 < RE < 109 ohm.
Anti-static flooring system including anti-static primer and copper band. Thickness 2 - 3 mm.
Two-component, self-levelling epoxy formulation used to form electrically conducitive dissipative coatings according to ESD requirements.
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%
9. Tank Coating -
Cement-based:
Mapelastic ZERO
Pure Polyurea:
Purtop 1000
Sewerage/Water Treatment Plant:
Duresil EB
Sewerage/Water Treatment Plant:
Mapecoat EPN24 AP
Fluoride Wastewater Treatment:
Mapecoat DW25
2-comp cementitious mortar waterproofing.
Impermeable to water and certified to be used below covering, resistant to UV and agreesive substance from penetrating the concrete. Certified as Concrete Protection EN1504-2 PI-MC-IR
Two-component, solvent-free pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings for hydraulic works, roofs and bridge decks directly on site.
Two component, anti-acid epoxy paint modified with hydrocarbide resin for protecting concrete and steel surfaces.
Epoxy novolac coating with high chemical resistance, to be applied on top of waterproofing layer.
Epoxy non-toxic coating, to be applied on top of waterproofing layer.
Sheet Membrane Multi-purpose, LDPE membrane for damp-proofing and for screed separation.
2-comp fluid Epoxy thixotropic structural adhesive for structral bonding and repair.
2-comp fluid Epoxy resin for strucutral filling in conrete cracks and gaps. Liquid-form.
2-comp Epoxy adhesive for construction joints and monolithic surface cracks. Thixotropic paste.
Multi-purpose cementitious grout. Dual-stage expansion, shrink-conpensated. Normal setting time, with high strength cement, graded 1.2mm aggregates and special additives.
General purpose, shrinkage-controlled, fibre-reinforced, patch repair mortar.
Shrink-conpensated, fibre-reinforced grout material.
Applicable for vertical surface without formwork (thickness 3 to 5 cm per layer)
14. Chemical Anchor -
Mapefix EP50
Epoxy resin for structural chemical anchor
Data Centres: A data center's construction requires specialized design and infrastructure to ensure optimal performance and security.
This includes the use of robust building materials, reinforced structures, complete waterproofing systems from the foundations to the roofs, materials to prevent moisture buildup, specialised coatings, dissipative flooring system, etc.
Electrically dissipative Resistant to most aggresive chemical Highly resistant to wear and abrasion Easy to clean, Low maintenance & dust repellent Very low emission levels of VOC and micro-particles Durable and have excellent mechanical performance
Tel number : 603-7842 9098
Email : [email protected]
.png?sfvrsn=c842a28b_0)