Products for Resilient, LVT and Textile Materials

Scroll Down

Skim Coating, Rapid Repair & Levelling Compounds

FIBERPLAN

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling thicknesses from 3 to 10 mm of existing and new wooden floors, wooden boarding, chip-board...

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound. ...

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2...

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:...

MAPECEM

Special fast setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on both...

Special fast setting hydraulic binder for the preparation of rapid setting and...

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of...

Pre-blended, ready-to-use, quick-setting and drying (24 hours),...

Mapecem® Quickpatch

High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete...

High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is a...

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building...

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for...

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive...

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to...

Planiprep™ SC

High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to...

High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a...

PLANITOP SMOOTH & REPAIR R4

(Distributed in New Zealand in original Italian packaging name - PLANITOP RASA & RIPARA R4) Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and...

(Distributed in New Zealand in original Italian packaging name - PLANITOP RASA...

UC LEVELLER

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm:...

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them...

Ultra-fast hardening self-levelling smoothing compound with very low VOC...

Primers for Concrete & Timber Substrates

ECO PRIM GRIP

Ready-to-use bonding promoter and primer made from synthetic acrylic resin and silica inerts with a very low emission level of volatile organic compounds (VOC) for render, smoothing and levelling...

Ready-to-use bonding promoter and primer made from synthetic acrylic resin and...

ECO PRIM T PLUS

PRIMERSolvent free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC). TECHNICAL DATA:Consistency: liquid.Colour: light blue.Dilution rate:...

PRIMERSolvent free, low odour acrylic primer in water dispersion with very low...

MAPEPRIM SP

Two-component solvent-free primer. Applications: Treatment of gypsum and anhydrite surfaces before the installation of ceramic tiles or stone material with cementitious adhesives. Mapeprim SP...

Two-component solvent-free primer. Applications: Treatment of gypsum and...

Acoustic Insulation & Soundproofing

MAPESONIC CR

Soundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors. TECHNICAL DATA: Thickness: 2 mm and 4 mm. Format: –...

Soundproofing mat in sheets of rubber and cork applied on substrates before...

Moisture Barriers & Primers for Concrete Substrates

MAPEPROOF 1K TURBO

MOISTURE VAPOUR BARRIEROne component, solvent free, moisture curing and rapid drying polyurethane surface membrane with very low emission of volatile organic compoundsTECHNICAL DATA (typical...

MOISTURE VAPOUR BARRIEROne component, solvent free, moisture curing and rapid...

PLANISEAL MR

Two component water based epoxy primer and moisture barrier suitable for green concrete and damp substratesTECHNICAL DATA: Consistency: liquid. Colour: light grey - semi gloss when dry, matt when...

Two component water based epoxy primer and moisture barrier suitable for green...

PRIMER MF

Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -...

Two-component solvent-free epoxy primer to be used as an adhesion promoter for...

TRIBLOCK P

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B...

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp...

Resilient & Textile Adhesives

ADESILEX G19

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy...

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or...

ROLLCOLL

Multi-purpose adhesive in water dispersion for laying vinyl floors and walls and for bonding textile floors and walls with all types of backing. TECHNICAL DATA: Consistency: creamy paste. Colour:...

Multi-purpose adhesive in water dispersion for laying vinyl floors and walls...

ULTRABOND ECO 170

Adhesive in water dispersion with a quick, strong initial bond and very low emission level of volatile organic compounds (VOC), specially formulated for textile flooring. TECHNICAL DATA: Consistency:...

Adhesive in water dispersion with a quick, strong initial bond and very low...

ULTRABOND ECO 380

Adhesive in water dispersion with a strong initial bond, long open time, for vinyl floors. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time:...

Adhesive in water dispersion with a strong initial bond, long open time, for...

ULTRABOND ECO CONTACT

Solvent-free contact adhesive for resilient and textile floor and wall coverings. ULTRABOND ECO CONTACT is a contact adhesive which has to be applied on both the substrate and the back of the...

Solvent-free contact adhesive for resilient and textile floor and wall...

ULTRABOND ECO FIX

Adhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles. TECHNICAL DATA: Consistency: creamy...

Adhesive in water dispersion which remains permanently tacky with very low...

ULTRABOND ECO TACK

Adhesive with permanent tack in water dispersion with a very low emission of volatile organic compounds for self-laying textile squares. TECHNICAL DATA: Consistency: liquid. Colour: light beige....

Adhesive with permanent tack in water dispersion with a very low emission of...

ULTRABOND ECO V4 SP FIBER

Multi-purpose, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres, particularly suitable for laying...

Multi-purpose, acrylic adhesive in water dispersion with extended open time and...

ULTRABOND ECO VS90 PLUS

Universal high temperature adhesive in water dispersion with very low emission level of volatile organic compounds for resilient floor coverings. TECHNICAL DATA: Consistency: creamy paste. Colour:...

Universal high temperature adhesive in water dispersion with very low emission...

ULTRABOND TX57

Adhesive with high rapid tack for laying textile and linoleum flooring. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-20 minutes. Open time: 20-30 minutes. Set to...

Adhesive with high rapid tack for laying textile and linoleum flooring....

Systems for Installation of Soft Covering, Vinyl, LVT, Textile and other Resilient Flooring

Get inspiration here for your next project

Show more

NZR16 - System for the Installation of LVT Over Acoustic Matting on a Concrete Substrate
Show more

NZR15 - FAST TRACK System for the Installation of Sheet Vinyl/LVT Over Engineered Screed
Show more

NZR14 - System for the Installation of Vinyl Sheet/LVT over Engineered Screed
Show more

NZR13 - System for Installing LVT Planks over Existing Ceramic Tiles
Show more

NZR12 - System for the Installation of Carpet Tiles on Uneven Concrete with High Residual Moisture
Show more

NZR11 - System for the Installation of Vinyl on Steps and Skirtings
Show more

NZR10 - System for the Installation of Vinyl Sheet on Floors in Wet Areas
Show more

NZR09 - System for the Installation of LVT over Timber or Particle Board Substrates
Show more

NZR08 - System for the Installation of Vinyl Sheet on Walls in Wet Areas
Show more

NZR07 - System for the Installation of Carpet Over a Concrete Substrate
Show more

NZR06 - System for the Installing Vinyl Floor Coverings Over Concrete with High Residual Moisture
Show more

NZR05 - System for the Installation of LVT Over Concrete with High Residual Moisture Content
Show more

NZR04 - System for the Installation of Loose Lay Vinyl Tiles/Planks
Show more

NZR03 - System for Installing Dual Bond Carpet Over a Concrete Substrate
Show more

NZR02 - System for the Installation of Carpet Over Existing Ceramic Tiles
Show more

NZR01 - System for the Fast Track Installation of LVT Planks

The best support for every type of floor

These floors are surfaces exposed to intense traffic and constant use such as in hospitals, schools, airports, offices, shops and industrial environments. Various factors have to be carefully analysed (moisture content, the flatness and evenness of the substrate, etc.) to guarantee durability and maximum performance.

This line of products includes adhesives, smoothing and levelling compounds and primers for installing resilient and acrylic and polyurethane resin flooring.