TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the weight of the resin. Packaging: 1 kg drums..
DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability time for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C).…
DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the permanent encapsulation of type A (external view), B (internal view) and C (no view, before confinement) in compliance…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the…
Plasticizing and anti-shrinkage agent for preparing, super-fluid, pumpable slurries for injection Where to use Cablejet can be used in preparing: – grouts for filling the casings of post-tensioning…
Plasticizing and anti-shrinkage agent for preparing, super-fluid, pumpable…
Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…
Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm ³ ): approx. 1.37. Dry solids content: (EN…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours…
DESCRIPTION: Two-component very low viscosity epoxy resin for injection in micro cracks. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural…
DESCRIPTION: Two-component very low viscosity epoxy resin for injection in…
-ltd-logos/mapei---header-logo.png?sfvrsn=31878676_6){kind=logo}
-ltd-logos/mapei-mobile-logo-266-x-62.png?sfvrsn=30878676_2){kind=logo}
-ltd-logos/mapei-mobile-retina-532-x-124.png?sfvrsn=3e878676_2)
Keep in touch
