MAPEFILL F

High-performance mortar for anchoring and sealing.
Mapefill F is used for anchoring and sealing machinery, tie-rods, prefabricated metallic structures, turbines, machine tools, etc. in concrete. It is also suitable for filling rigid joints between concrete elements and underneath walls.
Mapfill F is made from high-strength cement, selected aggregates and special additives.
Mapefill F develops extremely high flexural and compressive strength, even after short curing times (24 hours), and is characterised by the high bond it forms on steel and concrete. The mix is prepared by blending a 25 kg bag of Mapefill F with the amount of water which corresponds to the consistency required: approximately 3.1 litres for a plastic consistency (for sealing) or 4.5 litres for a more fluid consistency (for anchoring).
In this case, the mortar formed may be applied by casting into the seating areas saturated with water, taking care to expel all air traps to avoid the formation of bubbles. When filling large volumes, we recommend adding Gravel 6-10.
Mapefill F complies with the minimum requirements of EN 1504-6 and also complies with the French Standard NF P 18-821:
– for sealing in all positions: class 12;
– anchoring: class 6.

Consumption
1.8 kg/dm³ of cavities to be filled.

Packaging
25 kg vacuum-sealed polyethylene bags.

Documentación relacionada

Hoja de datos
Descargar

Últimos proyectos MAPEFILL F

Category icon INSTALACIONES DEPORTIVAS

2016/2018

Arkea Arena

Floirac, Francia

Anclaje, Nuevos edificios

Category icon INSTALACIONES DEPORTIVAS

2013/2016

Aquanor

Sainte-Clotilde, Francia

Impermeabilización

Category icon ESPACIOS / EDIFICIOS PÚBLICOS

2013/2015

Eglise Saint-Jacques le Majeur

Montrouge, Francia

Reparación del hormigón

Category icon INSTALACIONES DEPORTIVAS

2012/2015

Stade Matmut ATLANTIQUE

Bordeaux, Francia

Aditivos

Manténgase en contacto

Suscríbase a nuestro boletín para recibir las noticias de Mapei