ULTRACOAT PREMIUM BASE

Two-component, NMP-free, water-based undercoat with low emission of volatile organic compounds (VOC) and high insulating capacity, for preparing solid and pre-sanded wooden floors and wooden floors under repair for water-based finishing cycles.
TECHNICAL DATA:
comp. A comp. B
Consistency: liquid liquid.
Colour: milky white transparent.
Density (g/cm³): 1.030 1.075.
Storage: 12 months 12 months.
Duration of mix: 2 hours.
Mixing ratio: comp. A: comp. B = 5 : 1 (by volume).
Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or with ULTRACOAT EL.
Sanding: after 12 hours.
Varnishing (without sanding): after 2 hours, within 5 hours.
Consumption: 80-100 g/m² per coat.
Packaging: 6 litre kits (A+B), 2x6 l boxes.

ULTRACOAT PREMIUM BASE forma parte de las líneas:

Documentación relacionada

Hoja de datos
Descargar

Últimos proyectos ULTRACOAT PREMIUM BASE

Category icon TURISMO Y BIENESTAR

2018/2019

Aurelia Hotel

Milano Marittima, Italia

Floor/wall covering, Revestimientos de pintura, Recubrimientos en pisos

Category icon ESPACIOS / EDIFICIOS PÚBLICOS

2018/2019

Padua University

Padua, Italia

Recubrimientos en pisos

Category icon ESPACIOS / EDIFICIOS PÚBLICOS

2018

Pabellón Florentino Ibañez

Badajoz, España

Soluciones para pavimentos deportivos

Category icon RESIDENCIAL

2018

Omodeo Condominium

Bari, Italia

Colocación en pisos o paredes

Manténgase en contacto

Suscríbase a nuestro boletín para recibir las noticias de Mapei