ULTRACOAT TONING BASE
Two-component, water-based toning undercoat with high insulating properties with low emission of volatile organic compounds (VOC), no NMP for preparing solid and pre-sanded wooden floors and wooden floors under repair prior to applying ULTRACOAT water-based finishing cycles.
comp. A comp. B
Consistency: liquid liquid
Colours: milky white transparent
Density (g/cm³): 1.030 1.075
Storage: 12 months 12 months
Pot life of mix: 2 hours.
Mixing ratio: comp. A : comp. B = 5 : 1 (by volume).
Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL.
Buffing: after 16/24 hours.
Varnishing without sanding: after 2 hours and within 5 hours.
Consumption: 80-100 g/m² per coat.
Packaging: 6 l units (A+B).