Premium, Two-Part, Urethane Flooring Adhesive Ultrabond G21 is a two-part, reactive adhesive with low volatile organic compounds (VOCs), designed for extreme indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates.

Universal Carpet Tile Adhesive Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

High-Performance, Roller-Applied, Multi-Flooring Adhesive Ultrabond ECO 379 is an aggressively press-sensitive adhesive resistant to high moisture and to heavy rolling loads. It is designed for fast-track roller application, reducing time spent in adhesive application.

Professional, Two-Part, Urethane Flooring Adhesive Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

Heavy-Duty, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Universal, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 373 is a super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types. Ultrabond ECO 373 has been specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed. Ultrabond ECO 373 can also be used for flash-coving installations using traditional installation methods.

Bentonite-Based, Hydrophilic, Expandable, Flexible Rubber Waterstop Strip for Watertight Construction Idrostop B25 is a waterstop used to produce watertight construction joints in civil, industrial and hydraulic construction. Idrostop B25 is composed of a mix of natural sodium bentonite and polymers that give the product exceptional properties of compactness, flexibility and stability. The material is produced according to a formula developed in MAPEI’s own research and development laboratories. Idrostop B25 ’s expanding process takes place in a controlled, gradual and uniform way without the risk of altering the balance of the mix.

High-Strength, High-Flow, Prefabricated Drainage Composite with Woven Filter Fabric and Protective Film Mapedrain 35 is a high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 35 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics. Mapedrain 35 also has  a polymeric protective film on the back side to provide additional protection  to waterproofing membranes.

High-Strength, High-Flow, Prefabricated Drainage Composite with Protective Film Mapedrain 25 is a high-strength, three-dimensional drainage composite. It consists of a nonwoven filter fabric bonded to individual dimples of the molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles which might clog the core. Mapedrain 25 also has a polymeric protective film on the back side to provide additional protection to waterproofing membranes.

Two-Component, Nonsag, Polyurethane Sealant Mapeflex P2 NS is a two-component, nonsag, polyurethane elastomeric sealant that meets the requirements of ASTM C920.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee.

One-Component, Nonsag, Elastomeric Polyurethane Sealant Mapeflex P1 FT is a high-performance, one-component, fast-track, elastomeric, moisture-cured, polyurethane sealant and adhesive. Mapeflex P1 FT offers excellent adhesion to most surfaces, superior gunning and tooling, and excellent flexibility for moving joints.

Reinforcing Fabric for Liquid Waterproofing Membranes MAPEI LMR Fabric is a spunbond, nonwoven polyester fabric used as a reinforcement for liquid-applied waterproofing membranes. When embedded into a liquid-applied waterproofing membrane, it will add strength and durability to the overall system.

High-Performance, 100%-Solids, Epoxy Primer Primer E is a two-component, 100%-solids, epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method. Primer E is the most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress. Primer E’ s low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Advanced-Technology, Acrylic Latex Primer for Concrete Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and a self-leveling underlayment. Primer L can also be used as a primer for gypsum-based underlayments and patches.

Water-Based Epoxy Primer Primer WE is a two-component, polymer-modified, water-based, epoxy primer for enhanced adhesion to nonporous substrates before the application of MAPEI self-leveling materials. It improves adhesion over smooth, nonabsorbent and difficult-to-bond-to substrates such as properly prepared glazed ceramic tile, epoxy moisture barriers, cement-based terrazzo, old cutback adhesive residue and approved plywood subfloors.

Ultra Low-Viscosity, Consolidating, Epoxy Primer Primer CE is an ultra low-viscosity, two-component, 100%-solids surface-consolidating, epoxy primer. Primer CE effectively penetrates and consolidates the surface of weak concrete or gypsum substrates. Applied in a single-coat application, Primer CE is designed to restore structural integrity to friable substrates such as weak gypsum-based underlayments or lightweight concretes before the application of underlayments, toppings or floor finishes. Once installed, Primer CE is compatible with a wide number of primers and adhesives typically used with flooring installations, such as with tile, vinyl composition tile (VCT), carpet, sheet vinyl, wood and other floor finishing products.

All-Purpose Primer for Self-Leveling Underlayments Primer T is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a quicker curing time, for interior concrete and engineer-approved floors.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

Fiber-Reinforced, Gypsum, Self-Leveling Underlayment Planitex SLF is a fiber-reinforced, gypsum-based, self-leveling underlayment with enhanced flexural strength. It resists cracking and provides an exceptionally smooth, hard surface for use in dry, interior residential and commercial areas. Planitex SLF provides an excellent substrate for a wide variety of floor coverings. Planitex SLF can also be used to cover radiant or in-floor heating systems.

Calibrated, 20/40 Mesh Sand Mapesand Fine is a calibrated, washed and oven-dried, 20/40 mesh silica sand for use as an extender for Planitex™ SL gypsum self-leveling underlayment, and to improve the bond of resin and epoxy primers with self-leveling and topping compounds.

Calibrated, 16/30 Mesh Sand Mapesand Coarse is a calibrated, washed and oven-dried, 16/30 mesh silica sand for use with resin and epoxy primers to create texture, which is necessary  for the primer to bond with self-leveling and topping compounds.

Fast-Drying, Textured Primer for Nonporous Substrates Primer X is a fast-drying, high-performance, low-VOC, water-based, acrylic primer. It is textured to enhance the performance and adhesion of self-leveling underlayments over 100%-solids, epoxy moisture barriers and other nonporous substrates.

Multipurpose, Bond-Promoting Primer ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates. Plus, it improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates. Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

Premium, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Super is a highly versatile, non-sag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Standard, Urethane Adhesive for Hardwood Flooring Ultrabond ECO 975 is a 100%-solids, one-component, moisture-cured, urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.

Fast-Track, Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS Fast is a fast-curing, alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete that impact floor coverings. In addition, it significantly expedites floor installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for floor-covering installation.

Cleaner and Polish for Wood Floors Ultracoat Clean Polish is a concentrated product that may be diluted with clean water for regular maintenance or used at full strength for greater protection and appearance. It has been specially developed for the maintenance of interior residential and commercial wooden floors treated with Ultracoat wood-floor finishes. Ultracoat Clean Polish gives floor surfaces a bright, shiny appearance and also increases protection against wear by forming a water-repellent film.

Cleaner and Polish Remover Ultracoat ReNewIt Remover is a high-performance cleaning solution and polish remover. It is designed to remove polishes, stubborn dirt, oil and debris as the first step in preparing LVT, VCT, resilient, hardwood or bamboo flooring to be recoated with floor finish. After flooring is treated with Ultracoat ReNewIt Remover , it can be cleaned with Ultracoat ReNewIt Cleaner and then coated with Ultracoat ReNewIt Primer in preparation for a new floor finish.

Spot-Free Cleaner and Rinsing Solution Ultracoat ReNewIt Cleaner is a high-performance, spot-free cleaning and rinsing solution designed to remove any remaining U ltracoat ReNewIt Remover and dirt as the second step in preparing LVT, VCT, resilient, wood or bamboo flooring to be recoated with floor finish. It can also be used as a general cleaner for all flooring types.

Two-Component Primer and Bonding Agent Ultracoat ReNewIt Primer is a proprietary, high-performance, two-component, water-based primer and bonding agent designed as the third step in preparing LVT, VCT, resilient, wood or bamboo flooring to be resurfaced with Ultracoat HT 2K .

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

One-Component, Water-Based, Polyurethane, Gym Wood-Flooring Finish Ultracoat Gym is a one-part, water-based  formula designed to provide a high gloss finish for professional gym floors. It is a self-crosslinking, aliphatic polyurethane resin system with excellent abrasion resistance and slip resistance suitable for solid, pre-sanded, wood sports floors.

High-Performance, Cross-Linked, Water-Based, Polyurethane, Gym Wood-Flooring Finish Ultracoat Gym Pro is two-part, aziridine cross-linked, water-based, high-performance formula designed to provide a high-gloss finish for professional,  wood sports floors.

Fast-Set Urethane Adhesive for Hardwood Flooring Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Concentrated Cleaner for Wood Floors Ultracoat Universal Cleaner is a concentrated detergent specifically formulated for cleaning all types of floors, including wood, laminate, vinyl, rubber, tile and stone.

Concentrated Polish Remover for Wood Floors Ultracoat Polish Remover is a concentrated solution specifically formulated for the removal of wax-based or polymer-based wood-floor polishes.

Modified-Silane, Moisture-Control Wood-Flooring Adhesive Ultrabond ECO 983 is a single-component, 100%-solids, modified-silane wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins. With an extremely low emission level of volatile organic compounds (VOCs), the unique formulation of Ultrabond ECO 983 provides excellent bond strength and moisture control up to 15 lbs. (6.80 kg) MVER and 90% relative humidity (RH). Special trowel clips are provided to apply the adhesive in a monolithic layer for subfloor moisture control. It can also be used with traditional trowel-applied methods where subfloor moisture problems do not exist.

Low-Gloss Cleaner and Polish for Wood Floors Ultracoat Clean WPM is a concentrated product that may be diluted with clean water for regular maintenance or used at full strength for greater protection and appearance. It has been specially developed for the maintenance of interior residential and commercial wooden floors treated with Ultracoat wood-floor finishes. Ultracoat Clean WPM gives the surface of floors a low-gloss appearance and also increases the protection against wear by forming a water-repellent film.

Fast-Curing, Silane-Modified Polymer Adhesive Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Sawdust Admixture for Crack Filling of Wood Flooring Ultracoat Aqua Plus is a single-component binder that is mixed with sawdust produced during the final sanding process of preparing wood floors, and used to fill voids and cracks before the final application of water-based wood-floor finishing systems. Ultracoat Aqua Plus has extremely high wetting properties, is low in viscosity and forms a high-solids paste with excellent adhesion and workability. After application, the mixture dries quickly and can be sanded easily. The remaining mixture can be stored in a sealed plastic container.

Two-Component, High-Performance Sanding Sealer Ultracoat Premium Base is a two-component, high-performance, water-based sanding sealer for all types of wood flooring – including exotic species – and is specifically designed to work with Ultracoat water-based finishes in high traffic. Ultracoat Premium Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

One-Component, Water-Based Polyurethane Wood-Flooring Finish Ultracoat Easy Plus is a one-component, water-based wood-flooring finish that is available in the gloss levels of matte, satin and semi-gloss. Suitable for use in interior residential and light commercial applications, Ultracoat Easy Plus is a self-crosslinking, aliphatic polyurethane resin system with excellent abrasion resistance for solid, pre-sanded wood floors. Ultracoat Easy Plus adds a warm color to the wood and is non-yellowing.

Two-Component, Deep-Tone Sanding Sealer Ultracoat Toning Base is a two-component, deep-tone, water-based sanding sealer for all types of wood flooring – including exotic species – and is designed to enhance the natural color of wood without causing it to darken or redden. Ultracoat Toning Base provides a deep look similar to what solvent-based sealers offer and is specifically designed to work with Ultracoat water-based finishes. Ultracoat Toning Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

One-Component Sanding Sealer Ultracoat Universal Base is a one-component, rapid-drying, water-based sanding sealer for solid, engineered and exotic wood flooring. Specifically designed to work with Ultracoat water-based finishes, Ultracoat Universal Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

High-Modulus, Low-Viscosity, Epoxy Injection Resin for Crack Repair Epojet [NA] is a high-strength, two-component, 100%-solids, low-viscosity, epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood.

Very Low-Viscosity, Epoxy Injection Resin for Crack Repair Epojet LV [NA] is a moisture-tolerant, two-component, 100%-solids, very low-viscosity, epoxy injection resin that deeply penetrates as well as seals dry and damp hairline, non-dynamic cracks. Epojet LV [NA] may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Premium, Epoxy Grout and Mortar Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

Professional-Grade, Ready-to-Use Specialty Grout with Personalized Computer Color-Matching MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Premium, Two-Part, Urethane Flooring Adhesive Ultrabond G21 is a two-part, reactive adhesive with low volatile organic compounds (VOCs), designed for extreme indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates.

Universal Carpet Tile Adhesive Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

Professional, Two-Part, Urethane Flooring Adhesive Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

Heavy-Duty, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Universal, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 373 is a super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types. Ultrabond ECO 373 has been specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed. Ultrabond ECO 373 can also be used for flash-coving installations using traditional installation methods.

Two-Component, Aliphatic, Matte-Finish, Polyurethane Finishes Mapedeck Finish 100 , Mapedeck Finish 100 TS , Mapedeck Finish 111 R and Mapedeck Finish 111 TSR are two-component, aliphatic, matte-finish, polyurethane dispersion finishes. Depending on the product, they are available in NCS and RAL custom colors, transparent and anti-skid finishes. Mapedeck finishes form a tough abrasion-resistant, UV-resistant, non-yellowing, and easyto-clean finish over properly prepared surfaces.

Two-Component, Aliphatic, Matte-Finish, Polyurethane Finishes Mapedeck Finish 100 , Mapedeck Finish 100 TS , Mapedeck Finish 111 R and Mapedeck Finish 111 TSR are two-component, aliphatic, matte-finish, polyurethane dispersion finishes. Depending on the product, they are available in NCS and RAL custom colors, transparent and anti-skid finishes. Mapedeck finishes form a tough abrasion-resistant, UV-resistant, non-yellowing, and easyto-clean finish over properly prepared surfaces.

Two-Component, Aliphatic, Matte-Finish, Polyurethane Finishes Mapedeck Finish 100 , Mapedeck Finish 100 TS , Mapedeck Finish 111 R and Mapedeck Finish 111 TSR are two-component, aliphatic, matte-finish, polyurethane dispersion finishes. Depending on the product, they are available in NCS and RAL custom colors, transparent and anti-skid finishes. Mapedeck finishes form a tough abrasion-resistant, UV-resistant, non-yellowing, and easyto-clean finish over properly prepared surfaces.

Multipurpose Anti-Corrosion Epoxy Coating and Primer for Internal and External Ship Decks Mapecoat Guard 100 is a two-component, quick-drying multipurpose anticorrosion coating and bonding agent for use on metal substrates and as an intermediate coat on other types of primed surfaces.

Two-Component, Aliphatic, Matte-Finish, Polyurethane Finishes Mapedeck Finish 100 , Mapedeck Finish 100 TS , Mapedeck Finish 111 R and Mapedeck Finish 111 TSR are two-component, aliphatic, matte-finish, polyurethane dispersion finishes. Depending on the product, they are available in NCS and RAL custom colors, transparent and anti-skid finishes. Mapedeck finishes form a tough abrasion-resistant, UV-resistant, non-yellowing, and easyto-clean finish over properly prepared surfaces.

Self-Leveling, Polyurethane Resin for Forming Teak-Effect Flooring Mapedeck Teak Design is a two-component, aliphatic polyurethane-resinbased, self-leveling coating used to form a seamless teak-effect finish on internal and external decks.

Self-Leveling, Polyurethane, Seamless Flooring Resin Mapedeck Design is a two-component, aliphatic, polyurethane-resin-based, self-leveling coating used to form a seamless floor on internal and external decks.

Self-Leveling, Lightweight, Self-Extinguishing, Polyurethane-Based Underlayment Mapedeck Litescreed is a two-component, lightweight, self-extinguishing, polyurethane-resin-based self-leveling underlayment used to smooth and level interior and external decks before the installation of resin flooring systems and other approved floor coverings.

Self-leveling, “fillerized,” ready-to-use, aliphatic polyurethane base layer for leveling internal and external bridge decks on ships

Lightweight, Epoxy-Based Leveler for Interior and External Ship Decks Mapedeck Eposcreed Lite is a lightweight, epoxy-based leveling compound used to smooth and level interior and external decks before the installation of flooring.

Bonding Agent for Polyurethane-Based Systems Mapedeck Primer 200 is a bonding agent that creates an adhesion-promoting layer between the substrate and polyurethane-based products and systems.

Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in horizontal, vertical and overhead applications. MapeWrap 11 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems in Warm Climates MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in warm climates. MapeWrap 12 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

Medium-Viscosity, 100%-Solids Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, MapeWrap 31 provides high mechanical strength properties.

Low-Viscosity, 100%-Solids, Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

Low-Viscosity, 100%-Solids, Epoxy Resin Primer for the MapeWrap Composite System MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component, epoxy resin that is used as a seal coat for consolidating and priming concrete substrates. As the first component of the MapeWrap composite system, MapeWrap Primer 1 penetrates cementitious pore structures and provides a high bond for the other system components.

Low-Viscosity, 100%-Solids Epoxy Resin for Mechanical Saturation of MapeWrap Fabrics MapeWrap 21 TG is a 100%-solids, moisture-tolerant, low-viscosity epoxy resin with an extended working time used to encapsulate the MapeWrap composite system fabrics via the wet layup technique. MapeWrap 21 TG was specially developed to saturate and encapsulate both carbon and glass fiber fabrics by way of mechanical saturation and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

Medium-Viscosity, 100%-Solids Epoxy Resin for Dry-Layup Impregnation of MapeWrap Fabrics MapeWrap 31 T [NA] is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used to encapsulate the MapeWrap composite system fabrics using the dry layup method. MapeWrap 31 T [NA]was specially developed to saturate and encapsulate both carbon and glass fiber fabrics and to cure to a high-performance FRP laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

High-Strength, Uni-Directional E-Glass Fiber Fabric MapeWrap G Uni-Ax is a high-strength, uni-directional E-glass fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of structural elements. MapeWrap G Uni-Ax 900 is applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures to improve the strength and/or seismic performance of concrete columns, masonry and concrete walls, and concrete beam-column connections.

Corrosion-Inhibiting Admixture Polychem CI is a liquid corrosion-inhibiting admixture based on calcium nitrite. Polychem CI inhibits the onset of corrosion of reinforcing steel caused by chlorides typically present in de-icing materials. Polychem CI meets the requirements of ASTM C494 as a Type C and AASHTO M194 as a Type C.

Densified Silica-Fume Admixture Microsilica is a densified powder admixture with pozzolanic action, to be used in combination with plasticizers and superplasticizers for high-quality mortars, grouts and concrete. Microsilica complies with the provisions and specifications of ASTM C1240 and AASHTO M307. Microsilica is an amorphous silicon dioxide (silica) consisting of sub-micron spherical primary particles and agglomerates of these. The material is highly reactive in cementitious and ceramic bond systems. The average diameter of a Microsilica sphere is about 0.15 micron. Although some of the spheres exist as single entities, most of them form primary agglomerates. The size of these may vary between 0.1 and 1 micron. This rather wide particle size distribution contributes to high packing efficiency.

Pure Zinc Galvanic Anode Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.

Penetrating, Water-Based, Silane/Siloxane Water Repellent Planiseal WR is a silane/siloxane-blend, water-repellent, transparent sealer that provides resistance to water, dirt and chlorides.

Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent Planibond 3C is a three-component, cementitious, moisture-tolerant, epoxy-modified corrosion inhibitor and bonding agent. Water-based and solvent-free, it can be applied using a brush, a short-nap roller, a push broom or hopper spray equipment. Use Planibond 3C on all exposed reinforcing steel and as a bonding agent before the placement of repair products.

Two-Component, Aliphatic, Polyurethane Topcoat Mapefloor Finish 450 is a two-component, solvent-free, aliphatic, polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces in areas that are exposed to direct sunlight.

Clear, 100%-Silane, Penetrating Water Repellent Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water repellent and sealer designed to provide water repellency on concrete and masonry. It penetrates deeply, protecting new and existing substrates against moisture/chloride intrusion.

Water-Based, 40%-Silane, Penetrating Water Repellent Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion.

Corrosion-Inhibiting Coating for Reinforcing Steel Mapefer 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Two-Component, Polyurethane Topcoat for Mapefloor Parking Deck System Mapefloor Finish 415 NA is a two-component, solvent-free, aromatic polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces where the Mapefloor parking deck system is utilized.

Penetrating, Water-Based, Silane/Siloxane Water Repellent Planiseal WR is a silane/siloxane-blend, water-repellent, transparent sealer that provides resistance to water, dirt and chlorides.

Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent Planibond 3C is a three-component, cementitious, moisture-tolerant, epoxy-modified corrosion inhibitor and bonding agent. Water-based and solvent-free, it can be applied using a brush, a short-nap roller, a push broom or hopper spray equipment. Use Planibond 3C on all exposed reinforcing steel and as a bonding agent before the placement of repair products.

Two-Component, Aliphatic, Polyurethane Topcoat Mapefloor Finish 450 is a two-component, solvent-free, aliphatic, polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces in areas that are exposed to direct sunlight.

Clear, 100%-Silane, Penetrating Water Repellent Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water repellent and sealer designed to provide water repellency on concrete and masonry. It penetrates deeply, protecting new and existing substrates against moisture/chloride intrusion.

Water-Based, 40%-Silane, Penetrating Water Repellent Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion.

Corrosion-Inhibiting Coating for Reinforcing Steel Mapefer 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Two-Component, Polyurethane Topcoat for Mapefloor Parking Deck System Mapefloor Finish 415 NA is a two-component, solvent-free, aromatic polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces where the Mapefloor parking deck system is utilized.

Two-Component Polyurethane Primer Mapefloor PU Primer [NA] is a two-component, polyurethane-based primer that can be used for initial application of Mapefloor parking deck systems or as a recoat primer for already installed polyurethane deck systems.

Two-Component, Fast-Curing, Polyurethane Basecoat for Mapefloor Parking Deck System Mapefloor PU 400 FC is a two-component, fast-curing, polyurethane basecoat specifically designed for use as a waterproofing membrane for elevated concrete surfaces where the Mapefloor parking deck system is utilized. With its high elongation and crack-bridging properties, Mapefloor PU 400 FC is suited as a basecoat layer on concrete substrates subject to vibration.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Premium, Epoxy Grout and Mortar Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

Professional-Grade, Ready-to-Use Specialty Grout with Personalized Computer Color-Matching MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Professional, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI Ultralite Mortar Pro is a professional-grade, lightweight, single-component thin-set mortar that can also be used for large-and-heavy-tile and non-sag applications. This polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite Mortar Pro ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and contains more than 20% recycled content.

Premium, Highly Deformable, Lightweight, Gauged-Tile Mortar with Polymer MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Premium, Two-Part, Urethane Flooring Adhesive Ultrabond G21 is a two-part, reactive adhesive with low volatile organic compounds (VOCs), designed for extreme indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates.

Premium, Clear, Thin-Spread VCT Adhesive Ultrabond ECO 711 is a latex-based adhesive that offers a quick drying time with enhanced grab and slip resistance for vinyl composition tile (VCT) installations. Ultrabond ECO 711 is translucent when dry, allowing layout lines to be easily seen.

Standard Flooring Adhesive Ultrabond ECO 20 has been designed to provide both value and performance in a standard flooring adhesive. Its unique formulation provides ample working time for installing felt-backed vinyl sheet flooring, smooth-backed carpet and rough-backed carpet.

Standard, Urethane Adhesive for Hardwood Flooring Ultrabond ECO 975 is a 100%-solids, one-component, moisture-cured, urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Premium, Urethane Rubber-Sports-Flooring Adhesive Ultrabond ECO 570 is a moisture-curing, one-component, polyurethane polymer adhesive specifically designed for the direct bonding of high-performance reground-rubber sports flooring in interior or exterior applications. Its unique formulation is perfectly suited for most types of reground-rubber sports flooring and provides an aggressive and durable bond. Ultrabond ECO 570 utilizes rapidly renewable raw materials as part of the formulation and is free of phthalate plasticizers.

Premium Adhesive for FRP Panels Ultrabond ECO 901 adhesive has been specfically formulated as a bonding agent for fiberglass reinforced plastic (FRP) panels.

Universal Carpet Tile Adhesive Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

Fast-Set Urethane Adhesive for Hardwood Flooring Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Modified-Silane, Moisture-Control Wood-Flooring Adhesive Ultrabond ECO 983 is a single-component, 100%-solids, modified-silane wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins. With an extremely low emission level of volatile organic compounds (VOCs), the unique formulation of Ultrabond ECO 983 provides excellent bond strength and moisture control up to 15 lbs. (6.80 kg) MVER and 90% relative humidity (RH). Special trowel clips are provided to apply the adhesive in a monolithic layer for subfloor moisture control. It can also be used with traditional trowel-applied methods where subfloor moisture problems do not exist.

Fast-Curing, Silane-Modified Polymer Adhesive Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Premium Wall-Base Adhesive Ultrabond ECO 575 [NA] is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base. Ultrabond ECO 575 [NA] also has been reformulated to offer even greater grab and wet strength, keeping corners wrapped tight. Its light-colored, water-based, acrylic-polymer formulation won't stain even the whitest wall base.

Professional Carpet Adhesive Ultrabond ECO 185 is a latex-based adhesive that offers fast grab and quick leg development for the fast-track installation of commercial carpet. It can be used in direct-bond and double-stick carpet applications.

Professional, Two-Part, Urethane Flooring Adhesive Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Heavy-Duty, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Universal, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 373 is a super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types. Ultrabond ECO 373 has been specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed. Ultrabond ECO 373 can also be used for flash-coving installations using traditional installation methods.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring on Walls Ultrabond ECO MS 4 LVT Wall [NA] is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring Ultrabond ECO MS 4 LVT [NA] is a moisture-curing, one-component, silane-modified, hybrid-polymer adhesive specifically designed for the direct bonding of vinyl and rubber flooring in interior applications.

Lightweight, Cement-Polymer, Hybrid, Screed Mortar System Mapecem Marine Hybrid [NA] is a rapid-curing, lightweight, shrinkage-compensated, cement-polymer-based, screed mortar system consisting of Mapecem Marine 1000 [NA] and Hydrogel Marine [NA] additive. Mapecem Marine Hybrid [NA] can be used for the marine applications of leveling or sloping internal decks up to 4" (10 cm) thick, in wet areas and in areas subject to heavy traffic before the installation of resin floors, vinyl floor coverings, wood flooring, ceramic tiles or stone flooring.

Self-leveling, “fillerized,” ready-to-use, aliphatic polyurethane base layer for leveling internal and external bridge decks on ships

Seamless “elastic” self-leveling resin coating for internal and external bridge decks on ships

High-Performance, Quick-Setting, Fiber-Reinforced, Self-Leveling Underlayment Ultraplan Marine Fire [NA] is a self-leveling, quick-setting, fiber-reinforced underlayment for interior ship decks subject to heavy traffic, and is a component of a soundproof floating floor system. It has high compressive strength and can withstand light foot traffic after 3 hours and vehicular rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Ultraplan Marine Fire [NA] offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

Lightweight, Fiber-Reinforced, Quick-Setting, Self-Leveling Underlayment Ultraplan Marine 900 [NA] is a lightweight, fiber-reinforced, quick-setting, self-leveling underlayment for interior decks. It can withstand light foot traffic after 2 to 3 hours and rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Ultraplan Marine 900 [NA]offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

High-Strength, Lightweight, Fiber-Reinforced, Quick-Setting, Self-Leveling Underlayment Ultraplan Marine 1400 [NA] is a fiber-reinforced, high-strength, lightweight, quick-setting, self-leveling underlayment for smoothing and leveling interior ship decks, and is a component of a soundproof floating floor system. It can withstand light foot traffic after 3 hours and rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Ultraplan Marine 1400 [NA] offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

Pre-Blended, Lightweight, Shrinkage-Compensated, Cement-Based Screed Mortar Mapecem Marine 1000 [NA] is an accelerated-cure, lightweight, shrinkage-compensated screed mortar for leveling or sloping up to 2" (5 cm) thick for ship decks before installation of floor coverings or tiles. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Mapecem Marine 1000 [NA] offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Premium, Clear, Thin-Spread VCT Adhesive Ultrabond ECO 711 is a latex-based adhesive that offers a quick drying time with enhanced grab and slip resistance for vinyl composition tile (VCT) installations. Ultrabond ECO 711 is translucent when dry, allowing layout lines to be easily seen.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Universal Carpet Tile Adhesive Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

Professional Carpet Adhesive Ultrabond ECO 185 is a latex-based adhesive that offers fast grab and quick leg development for the fast-track installation of commercial carpet. It can be used in direct-bond and double-stick carpet applications.

Moisture-Resistant, Fast-Drying Patch and Skimcoating Compound Planiprep PSC is a fast-drying, cement-based, fiber-reinforced, polymer-modified patch and skimcoating compound designed for preparing concrete and wood substrates for flooring installation.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Heavy-Duty, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Universal, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 373 is a super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types. Ultrabond ECO 373 has been specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed. Ultrabond ECO 373 can also be used for flash-coving installations using traditional installation methods.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT [NA] is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Sound-Reduction, Moisture-Resistant Tape for Resilient and Wood Flooring Installation Mapecontact SRT is a double-sided, foam-core, dry-film tape for rapidly and permanently installing solid vinyl sheet, vinyl tile and vinyl plank flooring, as well as prefinished engineered and solid wood. Providing sound reduction for multi-family living, it has also been specifically designed to instant bond and instant utilization for residential and commercial floor installations. Mapecontact SRT is unaffected by high moisture conditions in concrete and can be installed without moisture testing. Plus, it provides subfloor moisture protection for wood and bamboo flooring.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring Ultrabond ECO MS 4 LVT [NA] is a moisture-curing, one-component, silane-modified, hybrid-polymer adhesive specifically designed for the direct bonding of vinyl and rubber flooring in interior applications.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock technology to help protect against mold and mildew.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Professional-Grade, Ready-to-Use Specialty Grout with Personalized Computer Color-Matching MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock technology to help protect against mold and mildew.

Water-Repellent Skimcoating Mortar for Concrete and Glass/Porcelain Mosaics Planitop 200 is a water-repellent skimcoating mortar designed to smooth, level and finish interior/exterior concrete walls and masonry, glass and porcelain mosaics, acrylic paints and drywall panels. Planitop 200 is a special blend of special binders and admixtures, selected aggregate and powder polymers, all formulated to produce high bond strength and easy finishing. Mixed only with water, Planitop 200 is available in gray and white.

Corrosion-Inhibiting Coating for Reinforcing Steel Mapefer 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Roller-Grade, Flexible, Cementitious, Intermediate Waterproofing Membrane for Concrete Protection Mapelastic Smart is a flexible, cementitious membrane for protecting new and repaired concrete structures. Mapelastic Smart is designed as an intermediate waterproofing membrane.

High-Strength, High-Flow, Prefabricated Drainage Composite with Woven Filter Fabric and Protective Film Mapedrain 35 is a high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 35 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics. Mapedrain 35 also has  a polymeric protective film on the back side to provide additional protection  to waterproofing membranes.

High-Strength, Extra High-Flow, Prefabricated Drainage Composite Mapedrain 40 is a high-strength, three-dimensional drainage composite. It consists of a high-performance, heavyweight nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. Mapedrain 40 ’s 8-ounce (227-gram) nonwoven fabric provides superior filtration. This allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

Moderate-Strength, Intermediate-Flow, Prefabricated Drainage Composite Mapedrain 10 is a moderate-strength, three-dimensional drainage composite. It consists of a nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

High-Strength, High-Flow Drainage Composite for Foundations Mapedrain TD Drainage Composite is a high-strength, three-dimensional modular drainage and collection composite for foundations. It consists of a nonwoven filter fabric that is bonded to and wrapped around a molded polypropylene core, minimizing fabric intrusion into the drainage channels that can be caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain TD Drainage Composite is designed to replace a conventional gravel-covered pipe drain.

Extra High-Strength, High-Flow, Pre-Fabricated Drainage Composite Mapedrain 50 is an extra high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 50 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics.

High-Strength, High-Flow, Prefabricated Drainage Composite with Woven Filter Fabric Mapedrain 30 is a high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 30 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics.

Detailing Sealant for Mapeproof HW and Mapeproof SW Mapeproof Sealant is a trowel-grade sealant, composed of sodium bentonite clay and specially designed polymers, that is used as a detailing accessory in conjunction with Mapeproof HW and Mapeproof SW waterproofing membranes. When Mapeproof Sealant comes into contact with moisture, it swells to seal against water intrusion. Mapeproof Sealant is easily applied and bonds to most substrates. When used with Mapeproof HW or Mapeproof SW , Mapeproof Sealant forms a seamless waterproofing system.

High-Strength, High-Flow, Prefabricated Drainage Composite Mapedrain 20 is a high-strength, three-dimensional drainage composite. It consists of a nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely  into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

Fittings for Installing Mapedrain TD Drainage Composite Mapedrain TD Fittings consist of end outlet, side outlet, splice and corner fittings that are made out of polyethylene and assist in installing Mapedrain TD Drainage Composite . The end outlet fitting connects the end of Mapedrain TD Drainage Composite to a 4" (10 cm) corrugated pipe. The side outlet fitting connects the side of Mapedrain TD Drainage Composite to a 4" (10 cm) corrugated pipe. The splice fitting connects two pieces of Mapedrain TD Drainage Composite end to end. And the corner fitting connects two pieces of Mapedrain TD Drainage Composite together, at the inside or outside corners of a building.

Cement-Based, Waterproofing and Surface-Preparation Coating Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing, including masonry surfaces, at a maximum depth of 10 feet (3,05 m). Planiseal 88 is also used as a surface-preparation product for MAPEI waterproofing products.

Flexible, Cementitious Waterproofing Mortar Planiseal 288 is a slightly flexible, two-component, polymer-modified, cementitious waterproofing and protective mortar for concrete and masonry.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee.

Air-Entraining Admixture Polychem VR is a ready-to-use air-entraining agent in an aqueous solution of neutralized vinsol resin. Polychem VR meets or exceeds the requirements of ASTM C260, CRD 13 and AASHTO M154.

Air-Entraining Admixture Polychem SA is a specifically developed, multi-component air-entraining admixture that has been stabilized to produce an air-void system that is consistent with industry requirements and standards. Polychem SA meets or exceeds the requirements of ASTM C260, CRD C-13 and AASHTO M154. Polychem SA is a synthetic-based alpha-olefin that will produce a small, more well-defined and spaced bubble structure. When added separately, it will produce an air-void system that is equivalent or exceeds that of pure Vinsol resin-based admixtures at substantially reduced dosage rates.

Broad-Spectrum, Water-Reducing Admixture Polychem 850 is a normal-setting, multi-range water-reducing admixture for concrete utilizing polycarboxylate technology. Polychem 850 is designed to facilitate the placing and finishing of ready-mixed concrete that is highly flowable and workable for extended periods of time with normal-setting characteristics. Polychem 850 meets the requirements of ASTM C494 and AASHTO M194 as Type A and Type F.

Air-Entraining Admixture Polychem SA-50 is a specifically developed multi-component air-entraining admixture that has been stabilized to produce an air-void system that is consistent with industry requirements and standards. Polychem SA-50 meets or exceeds the requirements of ASTM C260, CRD C-13 and AASHTO M154. Polychem SA-50 is a synthetic-based alpha-olefin that will produce a small, more well-defined and spaced bubble structure. When added separately, it will produce an air-void system that is equivalent or exceeds that of pure Vinsol resin-based admixtures at reduced dosage rates; the dosage rates of Polychem SA-50 are usually half of Vinsol resin-based admixtures. Polychem SA-50 has been formulated specifically for ready-mix and precast concrete applications where the need for accurate dispensing with small load size may be an issue.

Hydration-Stabilizing Admixture for Concrete Polychem Renu is a ready-to-use liquid solution manufactured to control the hydration process in Portland-cement concretes and concrete washwater. This advanced-set retarder coats the hydrating cement particles in the concrete and washwater, resulting in the suspension of the hydration chemical reaction. Polychem Renu maintains the plasticity, slump and temperature as it postpones the set of the concrete for a predictable period of time. Eventually, the Polychem Renu dosage is chemically consumed, allowing normal hydration to continue. Polychem Renu meets or exceeds the ASTM C494 and AASHTO M194 Type B and Type D requirements.

Water-Reducing Admixture for Concrete Polychem 400 NC is a normal-setting, multi-component, highly concentrated, water-reducing admixture conforming to ASTM C 494, CRD C 87 and AASHTO M 194 Type A and ASTM C 494 Type D. Polychem 400 NC will reduce the quantity of water required to produce concrete of a desired consistency, while providing greater economy for a given strength. It will increase strengths and improve workability and finishing characteristics.

Set-Retarding Admixture for Concrete Polychem R is a highly concentrated liquid admixture, set-retarding, which reduces the quantity of mixing water required to produce concrete of a standard consistency with the benefit of extended slump life and workability. Polychem R conforms to ASTM C494 and AASHTO M194 Type B and Type D.

Water-Reducing Admixture Mapeplast Paver Plus (formerly known as Polychem Paver Plus) is a normal-setting, multi-component, highly concentrated water-reducing admixture. Mapeplast Paver Plus will reduce the quantity of water required to produce concrete of a desired consistency while providing greater economy for a given strength. It will increase strength and improve workability and finishing characteristics. Mapeplast Paver Plus does not contain calcium chloride, and is compatible with air-entrained and non-air-entrained mixes. Mapeplast Paver Plus was specifically designed for concrete slip-form paving operations to extend haul time and maintain workability.

High-Range, Water-Reducing Admixture Mapefluid 441 (formerly known as Polychem 441) is a water-soluble, naphthalene-based, high-range water-reducing admixture. Mapefluid 441 can reduce mixing water up to 30%, producing high-strength concrete with a low water/cement ratio that can be placed at normal levels of workability or can be added to a mix to produce flowing concrete with increased strength. Mapefluid 441 is chloride-free and non-corrosive. Mapefluid 441 is recommended for use in all concrete, especially reinforced/prestressed and post-tensioned concrete.

Accelerating Admixture Mapefast Super Set (formerly known as Polychem Super Set) is a non-chloride, water-reducing admixture formulated to accelerate the strength development and setting time of concrete in cold weather. Mapefast Super Set can reduce labor costs associated with the finishing process. Mapefast Super Set is non-corrosive and, therefore, will not aid in the corrosion of reinforcing steel embedded within the concrete. It is recommended for use in all types of concrete, especially reinforced and prestressed.

Water-Reducing, Accelerating Admixture Polychem HE is a chloride-based liquid admixture containing water-reducing and accelerating components. Polychem HE can be used to accelerate the setting characteristics of concrete and promote early strength gain of concrete. Polychem HE meets the requirements of ASTM C494 as a Type C and Type E, CRD C87 and AASHTO M194.

Corrosion-Inhibiting Admixture Polychem CI is a liquid corrosion-inhibiting admixture based on calcium nitrite. Polychem CI inhibits the onset of corrosion of reinforcing steel caused by chlorides typically present in de-icing materials. Polychem CI meets the requirements of ASTM C494 as a Type C and AASHTO M194 as a Type C.

Non-Chloride Accelerating Admixture Mapefast Super Set Plus (formerly known as Polychem Super Set Plus) is a non-chloride, water-reducing admixture formulated to accelerate the strength development and setting time of concrete in cold weather. Mapefast Super Set Plus can reduce labor costs associated with the finishing process. Because the non-corrosive Mapefast Super Set Plus will not aid in the corrosion of reinforcing steel embedded within the concrete, it is recommended for use in all types of concrete, especially reinforced and prestressed.

Viscosity-Modifying Admixture Mapecrete VMA (formerly Polychem VMA) is a liquid admixture specially formulated to improve the viscosity of highly flowable mixtures, decrease the potential for segregation and improve the finishing characteristics of lean concrete mixtures. Mapecrete VMA is recommended for use in self-consolidating concrete (SCC), concrete containing manufactured sand and high water-to-cement ratio mixes.

Plasticizing Admixture for Drycast Vibromix BP is a ready-to-use, high-performance, liquid plasticizer recommended for use in the production of standard and lightweight concrete blocks, pipes and any other manufactured concrete product, especially when zero or low slumps are required.

Non-Chloride Set-Accelerating Admixture Mapefast Super Set II (formerly known as Polychem Super Set II) is a non-chloride, accelerating and water-reducing admixture formulated to accelerate strength development and setting time of concrete in cold weather.

Premium, Rapid-Setting, Flexible Tile Mortar Granirapid is the industry’s first and most flexible, high-performance, fast-curing mortar system geared for fast-track projects. It develops high, early mechanical strength and can be specified for the most demanding tile applications. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Granirapid offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. When installed in conjunction with Ultracolor Plus FA grout, Granirapid will allow water submersion in only 72 hours.

Professional, Cement-Based Waterproofing Membrane Mapelastic 315 is a trowel-applied, flexible, fiber-mesh-reinforced waterproofing and crack-isolation membrane for installation under ceramic tile or stone on indoor/outdoor residential, commercial and industrial intermittent wet or submerged applications. Mapelastic 315 provides an excellent barrier to prevent water from migrating into other areas. Mapelastic 315 is compatible with any polymer-modified cement-based mortar (ANSI A118.4 or better) or epoxy mortar (ANSI A118.3). Mapelastic 315 exceeds ANSI A118.10 requirements for waterproofing and is IAPMO-listed for use as a shower-pan liner.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Pre-Blended, Lightweight, Shrinkage-Compensated, Cement-Based Screed Mortar Mapecem Marine 1000 [NA] is an accelerated-cure, lightweight, shrinkage-compensated screed mortar for leveling or sloping up to 2" (5 cm) thick for ship decks before installation of floor coverings or tiles. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Mapecem Marine 1000 [NA] offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

Professional, Two-Component, Fast-Set, Urethane Turf Seam Adhesive Ultrabond Turf PU 2K is a high-performance, two-component, fast-set, urethane adhesive designed for the high-performance seaming and direct bonding of synthetic turf used in athletic and landscape applications. Ultrabond Turf PU 2K is particularly suited for use in areas of low ambient relative humidity and in cool temperatures. Ultrabond Turf PU 2K is colored green to blend in with most synthetic turf products and cures within 2 to 4 hours to a tough, durable bond. Ultrabond Turf PU 2K provides seam strengths that exceed FIFA standards.

Professional, Two-Part, Urethane Flooring Adhesive Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

High-Modulus Epoxy Bonding Agent Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%-solids and moisture-tolerant. Planibond EBA is used primarily as a bonding agent for screeds and repair mortars.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

3-in-1 Membrane for Crack Isolation, Waterproofing and Sound Reduction Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation, waterproofing and vapor-control membrane. Mapeguard 2 helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile and natural stone. It also reduces the transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings.

All-in-One Membrane for Crack Isolation, Sound Reduction, Waterproofing and Vapor Management Mapesonic 2 is a patented, next-generation, flexible, 76-mil thin, lightweight, load-bearing, fabric-reinforced, “peel-and-stick” membrane for sound reduction, crack isolation, waterproofing and vapor management. Application of Mapesonic 2 can be immediately followed by installation of finished flooring. Mapesonic 2 reduces transmission of impact sound (such as footsteps and dropped objects) and airborne sound (such as voice and TV) through floors when installed under ceramic tile, stone, vinyl and wood floorings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" or 10 mm wide) from transmitting through grout, ceramic tile and natural-stone assemblies.

Fast-Tacking, Water-Based Primer for MAPEI Peel-and-Stick Membranes MAPEI SM Primer Fast is a ready-to-use, fast-drying, quick-tacking, water-based, pressure-sensitive, nonhydrolyzable latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer Fast greatly increases the bond of MAPEI’s peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

Butyl-Based, Sealing Tape for Use with MAPEI’s Bitumen-Based, Crack-Isolation Membranes Mapetape BB is a butyl-based, waterproofing sealing tape for use with MAPEI peel-and-stick, crack-isolation membranes. Mapetape BB has an extremely aggressive grip and superior long-term adhesion, ensuring immediate sealing upon contact. It is reverse-rolled for easy, fast application. A clear release liner on one side allows for easy handling and dry-fitting. Mapetape BB is compatible with Mapeguard 2 , Mapesonic 2 , Mapesound 90 and Mapeguard CI membranes.

Water-Based Primer for MAPEI Peel-and-Stick Membranes MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer greatly increases the bond of MAPEI’s peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

Professional, Sound-Reduction and Crack-Isolation Sheet Membrane Mapesound 90 is a flexible, thin, 90-mil, lightweight, load-bearing, fabric-reinforced “peel-and-stick” sound-reduction and crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with a recommended MAPEI polymer-modified cement-based mortar, or glue-down wood flooring can be immediately installed with any MAPEI urethane or hybrid-polymer-based wood adhesive. Mapesound 90 reduces transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile or natural-stone assemblies.

Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in horizontal, vertical and overhead applications. MapeWrap 11 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems in Warm Climates MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in warm climates. MapeWrap 12 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

Medium-Viscosity, 100%-Solids Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, MapeWrap 31 provides high mechanical strength properties.

Low-Viscosity, 100%-Solids, Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

Professional Large-and-Heavy-Tile Mortar with Polymer Ultraflex LHT is a non-sag, large-and-heavy-tile mortar and thin-set mortar for large-format and heavy tile and stone for interior/exterior installations on floors, walls and countertops. Ultraflex LHT is designed for use at 1/2" (12 mm) thickness to give better support under large-format tile. This polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application with excellent adhesion to the substrate and tile.

Standard, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LHT SG is a standard-grade, non-sag, nonslump, polymer-modified, large-and-heavy-tile mortar and thin-set mortar for interior/exterior installations on floors, walls and countertops. It is used to install large-format and heavy tile/stone, including porcelain tile, heavy-ribbed-back tile, brick pavers, dimensional tile and natural-stone tile. Ultraflex LHT SG is designed for use at 3/32" to 1/2" (2.5 to 12 mm) thickness to give better support under large-format tile. This mortar is formulated with Easy Glide Technology™ for ease of application and good adhesion to the substrate and tile.

Premium, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Standard, Urethane Adhesive for Hardwood Flooring Ultrabond ECO 975 is a 100%-solids, one-component, moisture-cured, urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.

Fast-Track, Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS Fast is a fast-curing, alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete that impact floor coverings. In addition, it significantly expedites floor installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for floor-covering installation.

High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

Fast-Set Urethane Adhesive for Hardwood Flooring Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Modified-Silane, Moisture-Control Wood-Flooring Adhesive Ultrabond ECO 983 is a single-component, 100%-solids, modified-silane wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins. With an extremely low emission level of volatile organic compounds (VOCs), the unique formulation of Ultrabond ECO 983 provides excellent bond strength and moisture control up to 15 lbs. (6.80 kg) MVER and 90% relative humidity (RH). Special trowel clips are provided to apply the adhesive in a monolithic layer for subfloor moisture control. It can also be used with traditional trowel-applied methods where subfloor moisture problems do not exist.

Fast-Curing, Silane-Modified Polymer Adhesive Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Fast-Setting, Polymer-Modified, Cement-Based Patching Compound Planipatch is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. When Planipatch is mixed with Planipatch Plus , the Planipatch Plus System can be used as an embossing leveler or as a patch to fill voids over properly prepared vinyl sheet goods, vinyl composition tile (VCT) and cement terrazzo before the direct glue-down installation of floor coverings.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

Detailing Sealant for Mapeproof HW and Mapeproof SW Mapeproof Sealant is a trowel-grade sealant, composed of sodium bentonite clay and specially designed polymers, that is used as a detailing accessory in conjunction with Mapeproof HW and Mapeproof SW waterproofing membranes. When Mapeproof Sealant comes into contact with moisture, it swells to seal against water intrusion. Mapeproof Sealant is easily applied and bonds to most substrates. When used with Mapeproof HW or Mapeproof SW , Mapeproof Sealant forms a seamless waterproofing system.

Rubberized-Asphalt Waterproofing Detailing Mastic Mapethene Mastic is a solvent-based, rubberized-asphalt mastic that provides excellent adhesion to Mapethene HT and Mapethene LT waterproofing sheet membranes as well as to structural concrete, masonry and wood surfaces. Mapethene Mastic is for use as a secondary seal on the seams, T-joints, laps, penetrations, terminations and other detailing areas of Mapethene waterproofing membranes. Mapethene Mastic is designed for use only on the top surface and edges of Mapethene HT and Mapethene LT membranes.

Cement-Based, Waterproofing and Surface-Preparation Coating Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing, including masonry surfaces, at a maximum depth of 10 feet (3,05 m). Planiseal 88 is also used as a surface-preparation product for MAPEI waterproofing products.

Flexible, Cementitious Waterproofing Mortar Planiseal 288 is a slightly flexible, two-component, polymer-modified, cementitious waterproofing and protective mortar for concrete and masonry.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee.

Premium Turf Seam Tape Ultrabond Turf Tape is a PET-based, spun-bonded, nonwoven fabric tape designed  specifically to work with MAPEI turf adhesives for seaming synthetic turf. Ultrabond Turf Tape is waterproof and provides superior tensile strength and tear resistance, which are vital for installations of professional athletic playing fields. It is also perfectly  suited as a seaming base for other synthetic turf applications, including installations  of residential landscaping, playgrounds and golf courses.

High-Viscosity, Urethane Adhesive for Turf Seams Ultrabond Turf PU 1K-HV is a high-viscosity, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K-HV can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

Low-Viscosity, Fast-Setting, Urethane Adhesive for Turf Installation Ultrabond Turf PU 1K-LV is a fast-setting, moisture-curing, polyurethane adhesive specifically designed for full glue-down applications with smooth-backed synthetic turf, such as for batting cages and lacrosse fields. The low-viscosity formula can be flat-troweled or sprayed via an airless pump sprayer. Ultrabond Turf PU 1K-LV is also suitable for repairs, curbs/edging and detail work.

Professional, Two-Component, Fast-Set, Urethane Turf Seam Adhesive Ultrabond Turf PU 2K is a high-performance, two-component, fast-set, urethane adhesive designed for the high-performance seaming and direct bonding of synthetic turf used in athletic and landscape applications. Ultrabond Turf PU 2K is particularly suited for use in areas of low ambient relative humidity and in cool temperatures. Ultrabond Turf PU 2K is colored green to blend in with most synthetic turf products and cures within 2 to 4 hours to a tough, durable bond. Ultrabond Turf PU 2K provides seam strengths that exceed FIFA standards.

Premium, Fast-Setting, Urethane Adhesive for Turf Seams Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Advanced-Technology, Acrylic Latex Primer for Concrete Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and a self-leveling underlayment. Primer L can also be used as a primer for gypsum-based underlayments and patches.

All-Purpose Primer for Self-Leveling Underlayments Primer T is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a quicker curing time, for interior concrete and engineer-approved floors.

Fast-Drying, Textured Primer for Nonporous Substrates Primer X is a fast-drying, high-performance, low-VOC, water-based, acrylic primer. It is textured to enhance the performance and adhesion of self-leveling underlayments over 100%-solids, epoxy moisture barriers and other nonporous substrates.

Multipurpose, Bond-Promoting Primer ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates. Plus, it improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates. Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

Water-Based, 100%-Acrylic, High-Quality Coating Elastocolor Paint is a high-quality, water-based, 100%-acrylic coating that forms a protective film for use on above-grade, exterior/interior concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems. Elastocolor Paint is available in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Water-Based, High-Build, Acrylic, Textured Coating Elastocolor Texture is a specially designed coating for use on exterior, above-grade, new and previously coated concrete and masonry surfaces. Elastocolor Texture ’s unique blend of aggregates produces an attractive, high-build, textured finish. It is ideal for use on restoration projects to reduce the appearance of surface imperfections and repairs or wherever a uniform textured finish is desired. Elastocolor Texture remains highly flexible and offers excellent filling properties and adhesion to prepared substrates.

Water-Based, 100%-Acrylic, Elastomeric Waterproof Coating Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Water-Based, 100%-Acrylic Primer for Elastocolor Coatings Elastocolor Primer WB is a clear, water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.

UltraCare Abrasive Surface Cleaner is a powerful, abrasive cleaner that is safe for use on a variety of ceramic, porcelain and natural-stone surfaces. This water-based, biodegradeable formula is nontoxic and nonflammable, containing no VOCs or acids. Cleaning does not require letting the product stand on the surface. UltraCare Abrasive Surface Cleaner penetrates deep into dense surface pores and easily removes ground-in dirt, grime, rust stains and mineral deposits. This product is formulated to remove most factory-applied waxes and floor finishes as well as light cementitious and epoxy grout residue.  It is excellent for use on heavily textured and hard-to-clean surfaces. Plus, it can be used in combination with any UltraCare cleaner or problem-solver.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.

UltraCare Sulfamic Acid Crystals is a granular powder that dissolves in water and produces a cleaner and problem-solver for nonporous, acid-resistant tile and natural stone. It removes cured cement grout haze, mortar residue, rust stains and mineral deposits such as efflorescence.

UltraCare Penetrating SB Stone, Tile & Grout Sealer is a natural-look, solvent-based penetrating sealer that provides maximum protection against most common stains. It is safe for use on all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cement grout. The product can also be used as a pre-grouting sealer.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Premium, Highly Deformable, Lightweight, Gauged-Tile Mortar with Polymer MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.

Polymer-Modified Thick-Bed and Render Mortar Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Hybrid-Polymer-Based Adhesive for Gauged Porcelain Tile Ultrabond ECO GPT is a single-component, non-sag, easy-to-trowel, hybridpolymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Premium, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.

Premium, Rapid-Setting, Flexible Tile Mortar Granirapid is the industry’s first and most flexible, high-performance, fast-curing mortar system geared for fast-track projects. It develops high, early mechanical strength and can be specified for the most demanding tile applications. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Granirapid offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. When installed in conjunction with Ultracolor Plus FA grout, Granirapid will allow water submersion in only 72 hours.

Premium, Flexible Tile Mortar Kerabond/Keralastic System is a high-performance, two-part system: Keralastic , a second-generation “flexible” acrylic latex additive, is used to enhance the performance of Kerabond , which is a premium-grade dry-set mortar. This system has exceptional bond strength, flexural strength, elongation and freeze/thaw durability. To ensure proper flexibility, always use a latex additive when applying a dry-set mortar over plywood or to set nonvitreous tiles.

Premium, Flexible Large-and-Heavy- Tile and Thin-Set Mortar Kerabond T / Keralastic System is a high-performance, two-part system: Keralastic , a second-generation “flexible” acrylic latex additive, is used to enhance the performance of Kerabond T , which is a premium-grade, large-and-heavy-tile mortar (formerly known as “medium-bed mortar”) and thin-set mortar. This system has exceptional bond strength, flexural strength, elongation and freeze/thaw durability.

Hybrid-Polymer-Based Adhesive for Gauged Porcelain Tile Ultrabond ECO GPT is a single-component, non-sag, easy-to-trowel, hybridpolymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Premium, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a quicker curing time, for interior concrete and engineer-approved floors.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a quicker curing time, for interior concrete and engineer-approved floors.

Polymer-Modified Thick-Bed and Render Mortar Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA – with DropEffect technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.

Fast-Track, Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS Fast is a fast-curing, alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete that impact floor coverings. In addition, it significantly expedites floor installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for floor-covering installation.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

Water-Based, 100%-Acrylic, High-Quality Coating Elastocolor Paint is a high-quality, water-based, 100%-acrylic coating that forms a protective film for use on above-grade, exterior/interior concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems. Elastocolor Paint is available in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Water-Based, High-Build, Acrylic, Textured Coating Elastocolor Texture is a specially designed coating for use on exterior, above-grade, new and previously coated concrete and masonry surfaces. Elastocolor Texture ’s unique blend of aggregates produces an attractive, high-build, textured finish. It is ideal for use on restoration projects to reduce the appearance of surface imperfections and repairs or wherever a uniform textured finish is desired. Elastocolor Texture remains highly flexible and offers excellent filling properties and adhesion to prepared substrates.

Water-Based, 100%-Acrylic, Elastomeric Waterproof Coating Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Water-Based, 100%-Acrylic Primer for Elastocolor Coatings Elastocolor Primer WB is a clear, water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.

Fast-Track, Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS Fast is a fast-curing, alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete that impact floor coverings. In addition, it significantly expedites floor installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for floor-covering installation.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing Wood-Flooring Adhesive Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

High-Performance Concrete Patch Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Fast-Curing, Silane-Modified Polymer Adhesive Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.