Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…
Closed cell polyethylene foam cord for the correct sizing of movement joints.…
Two-component, water-based epoxy coating for concrete floors and cementitious substrates and as a finishing compound for epoxy systems, to provide an anti-dust and oil resistant finishing treatment…
Two-component, water-based epoxy coating for concrete floors and cementitious…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…
A system for colouring Mapefloor products. Mapecolor Paste is a range of ready-mixed colouring pastes, which are added to Primer SN, Mapefloor I 300 SL, Mapefloor I 350 SL, Mapefloor I 500 W,…
A system for colouring Mapefloor products. Mapecolor Paste is a range of…
Two-component, thixotropic, polyurethane sealant with low modulus of elasticity, resistant to hydrocarbons, for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at…
Two-component, thixotropic, polyurethane sealant with low modulus of…
Structural R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete
Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion…
Flexible latex additive to be mixed with Kerabond T-R, Kerabond T-R Express and Adesilex P10. Used to impart elasticity to cement-based adhesives. Technical Data: Mixed with Kerabond T-R ans Kerabond…
Flexible latex additive to be mixed with Kerabond T-R, Kerabond T-R Express and…
Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum floor and wall coverings. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open…
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. Mapetex Sel is a non-woven, macro-holed fabric, made from synthetic polypropylene fibres, which is permeable to…
Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing…
Fine-grained, ultra quick-drying, thixotropic smoothing compound for: – repairs up to 25 mm; – laying of resilient coverings after 1 hour. TECHNICAL DATA: Where to use: internal floors and walls for…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is…
Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free epoxy resin-based filling primer. It is used to improve the bonding of epoxy and polyurethane Mapefloor Systems and is…
Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…
