Modified acrylic super-plasticiser for concrete, characterised by its low water/cement ratio, very high mechanical strength and long workability times. TECHNICAL DATA: Dosage: 0.5-2 lit every 100 kg…
Modified acrylic super-plasticiser for concrete, characterised by its low…
Polymer based super-plasticiser for concrete
Dynamon SX10 is a liquid admixture, developed through modification to acrylic polymers, in order to specifically aide the precast concrete industry by…
Polymer based super-plasticiser for concrete
Dynamon SX10 is a liquid…
Fine aggregate supplementing super-plasticizer for concrete with low loss of workability and high reduction of mixing water Where to use Dynamon SX 14 is particularly suitable for all applications…
Fine aggregate supplementing super-plasticizer for concrete with low loss of…
Dynamon SX 18 is a liquid superplasticising
admixture for high quality concrete (waterproof
and durable) with an accelerating effect on the
development of its mechanical strength. WHERE TO USE:…
Dynamon SX 18 is a liquid superplasticising
admixture for high quality…
Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…
Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low…
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds. TECHNICAL…
One-component, solvent-free, moisture curing polyurethane primer with a very…
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric coating product for internal and external surfaces. Available in the following grain sizes: 1.2 mm. TECHNICAL DATA:…
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric…
Two-component very low viscosity epoxy resin for injection in micro cracks. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural strengthening of…
Two-component very low viscosity epoxy resin for injection in micro cracks.…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and joints and carrying out small repairs. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Mixing ratio (in…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and…
Keep in touch
