Back

MAPEFLOOR I 300 SL

High-performance formulation for epoxy flooring in industrial, commercial and residential settings. Rapid installation, durable and resistant with an attractive finish.

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick.
May be coloured with MAPECOLOR PASTE.
Complies with standards applied in the foodstuffs sector.

ADVANTAGES:

Non-slip or smooth finish.
High resistance to wear and abrasion
Rapid installation
Highly attractive finish
High solids content
Easy to clean and sanitise
Resistant to most diluted chemicals

TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 3 : 1.
Colour of mix: neutral.
Consistency of mix: fluid.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 24 hours.
Final hardening time: 7 days.
Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg.
Storage: 24 months in its original sealed packaging.
Application: by roller or flat or notched trowel.
Consumption:
– 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN;
– 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN;
– 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN.
Packaging: 8 and 20 kg kits (A+B).