Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor System 53). Mapecoat I 600 W is a two-component, transparent epoxy primer in water dispersion. The two components which make up Mapecoat I 600 W must be mixed together using a low-speed drill with a mixing attachment until completely blended. When Mapecoat I 600 W is used as a primer for Mapefloor I 500 W apply in a single coat after diluting with water at a ratio of 1 : 1. After adding the water, mix Mapecoat I 600 W with a drill for approximately 3 minutes. Wait 3-4 hours before applying Mapefloor I 500 W. Apply Mapecoat I 600 W with a medium-haired long-haired or roller or with an airless spray gun.
Consumption 300-500 g/m2 according to the absorption.
Technical data sheet
Keep in touch
